Skip header
 

Displaying the files in the smart device on the whiteboard

1On the menu of RICOH Smart Device Connector, swipe left or right to select [Whiteboard].

2Tap [Send File].

3Select the location of the file to send to the whiteboard from [Album], [App File Folder] or other locations, and tap [Apply].

4Tap [Whiteboard Settings].

5Confirm the method to connect to the whiteboard.

  • Connect with QR Code

    When using the QR code to connect to the machine, check that [Connect with QR Code] is displayed in the upper part of the screen. If a different message is displayed, tap [Application screen illustration], select [Connect with QR Code], and then return to the previous screen.

  • Connect Machines on Same Network

    While connecting to the whiteboard that is on the same network, the name of the whiteboard is displayed on the upper part of the screen. If a different message is displayed, tap [Application screen illustration], and then select the whiteboard from the list under [Connect Machines on Same Network]. If the whiteboard you prefer is not on the list, tap [Add Machine], and then add the whiteboard by reading its QR code or directly specifying its IP address or host name.

6Connect to the whiteboard.

  • When using the QR code to connect to the whiteboard

    1. Touch the [Operation panel screen illustration] that is displayed on the whiteboard screen, and then touch [Use QR Code] to display the QR code on the whiteboard.

    2. Read the QR code with the camera of the smart device.

  • When connecting to a whiteboard on the same network

    Tap [Start].