On the menu of RICOH Smart Device Connector, swipe left or right to select [MFP / Printer].
Tap [Print].
Select the location of the file to print from [Album], [App File Folder] or other locations, and tap [Apply].
Tap [Print Settings].
Configure settings such as the number of copies to print and paper size.
Specify the destination.
Check that [Print Server] is displayed in the upper part of the screen. If a different destination is displayed, tap [], and then select [Print Server] from the list under [Connect Machines on Same Network].
When the information of the print server is not registered, tap [] to configure the print server. For details, see the procedures from Step 3 onward on Registering the print server.
Tap [Start].