Skip header
 

Registering the print server

1On the menu of RICOH Smart Device Connector, swipe left or right to select [MFP / Printer].

2Tap [Print Server Settings].

3Tap [Add Print Server].

4Enter the settings of the print server.

Entering the IP Address/Host Name or the shared name is mandatory.

Enter the domain name, login user name and password as required.

5Tap [Search].

6Select the print server, and then tap [Register].

7Select [ON] in [Use Print Server].

Note

  • You can register if PDF-Direct is available.

  • From the detailed settings screen of the registered print server, you can specify whether or not to make the PDF direct function available on the print server.