Skip header
 

Enabling Bluetooth in Quick Card Authentication

Enable the authentication by Bluetooth in Quick Card Authentication.

Check that the administrator authentication is enabled before specifying this setting.

1Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

2Press [User Tools].

3Press [Screen Features].

4Select [On] in [Bluetooth].

5Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

6Press [Operation panel screen illustration].

7Press the [Quick Card Authentication Config.] icon.

8Confirm that [Use Authentication] is selected.

When you change the setting from [Do not Use Authentication] to [Use Authentication], a message prompting you to restart the machine appears. If this is the case, follow the instruction on the screen to turn the main power of the machine off , and then turn it on again.

9Press [Bluetooth Settings].

10Press [Bluetooth Software], and select [Bluetooth Authentication Plugin].

11Restart the machine.

The modified setting will be applied when the machine is restarted.