Skip header
 

Configuring the QR Code

Specify the information to be embedded in the QR code.

1Log in as the machine administrator from the Smart Operation Panel.

2On the Home screen, press Operation panel screen illustration to display the application list screen, and then press [Smart Device Connector].

3Press [Operation panel screen illustration].

4For users unable to access the intranet, select [Allow Usage by Guests].

Specify when to disconnect the smart device automatically as required. If the specified time is too short, the connection may be disconnected while data is transmitted, and an error may occur.

5Select [Allow Bluetooth Connection] when using Bluetooth to connect to the machine or using the smart device for logging in to and out from the machine.

6If you are using HTTPS connection, select [Use HTTPS Connection].

7Press [Exit].