RICOH PX FAQs - By Product

[Question] Is the battery charger for the RICOH PX available ? / How to charge with the optional battery charger.

The battery charger for the DB-100 battery is the BJ-10 (optional).

There are several ways for charging; charging while putting the battery in the camera, or charging with the optional battery charger (BJ-10).

In order to charge with the BJ-10, remove the battery from the camera and set the battery to the BJ-10 to charge it.

  • 1 Turn off the camera. Slide the latch in the direction shown below (1) and open the battery/card cover (2).

    open the battery/card cover

  • 2 Release the battery latch to eject the battery. The battery can then be removed by hand. Be careful not to drop the battery when removing it from the camera.

    remove the battery

  • 3 Set the battery in the battery charger with the label side facing up. Align the battery so that [+] [-] symbols on it match up with the [+] [-] symbols on the charger. Charging will start automatically when it plugs in.
  • * The battery charger appearance varies depending on the market like below.
  • How to use the battery charger
  • How to use the battery charger
See below for further information.

Related Links :
Answer ID: px01040
Date created: June 10, 2011
Date modified: --
Product: RICOH PX
Operating system: --
Category: Hardware operations, Accessories
Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Did you visit the FAQ before or after the purchase ?


Please send us your feedback on this FAQ.

In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.

Useful LINKs:
Do you need other information? Please click any link you want from the following.

Page Top