GXR MOUNT A12 FAQs - By Product

[Question] How to attach / remove the lens to the GXR MOUNT A12.

Follow the steps below when you attach your lens to the GXR MOUNT A12.

Attaching the lens

  • 1 Line up the mark on the lens with the red mark on the lens mount unit, and attach the lens straight onto the lens mount unit.

    Line up the marks and attach the lens.

  • 2 Turn the lens to the right until the lens lock pin lines up with the lens lock groove.

Removing the lens

  • 1 Turn the lens to the left while pressing the lens release button until the mark on the lens lines up with the red mark on the lens mount unit.

    Lens release button

  • 2 Pull the lens straight out to remove it.

Note [Note]

  • For more information on the lens, refer to the lens instruction manual and other related documents.
 
Answer ID: gxr08815
Date created: September 29, 2011
Date modified: --
Product: GXR (GXR MOUNT A12)
Operating system: --
Category: Hardware specifications, Hardware operations
Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Which model(s) in the FAQ did you search ?

GXR with GR LENS A12 28mm
GXR with GR LENS A12 50mm
GXR with RICOH LENS S10 24-72mm
GXR with RICOH LENS P10 28-300mm
GXR with GXR MOUNT A12

Did you visit the FAQ before or after the purchase ?

Before
After

Please send us your feedback on this FAQ.



In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.
Useful LINKs:
Do you need other information? Please click any link you want from the following.

Page Top