GXR FAQs - By Product

[Question] How to attach the camera unit to the GXR body.

Be sure the power is off before attaching or removing the camera unit to / from the camera body.

Remove the terminal caps (the red marked in the figure below) from the GXR body and the camera unit.

Remove a teminal cap

Align the left side of the camera unit with the alignment mark (red marked in the figure below) on the camera body, and then slide the camera unit to the left unit until it clicks.

Attaching the camera unit to the body

In order to remove the camera unit, slide the camera unit release lever (red marked in the figure below) to the right, and remove the camera unit.

Removing the camera unit

Attention [Note]
Be careful not to drop the camera unit or the GXR body when attaching or removing them.

Answer ID: gxr00080
Date created: September 22, 2010
Date modified: --
Product: GXR (GR LENS A12 28mm F2.5)
Operating system: --
Category: Hardware specifications
Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Which model(s) in the FAQ did you search ?

GXR with GR LENS A12 28mm
GXR with GR LENS A12 50mm
GXR with RICOH LENS S10 24-72mm
GXR with RICOH LENS P10 28-300mm

Did you visit the FAQ before or after the purchase ?


Please send us your feedback on this FAQ.

In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.

Useful LINKs:

Do you need other information? Please click any link you want from the following.

Page Top