RICOH imagine.change.Global

GR DIGITAL IV : Details on the highlights display.

During playback, very bright areas in an image are highlighted and blinking on and off in the highlights display. This allows you to check some overexposed area for confirmation.

[Highlights display example]

The area circled in red in the below picture (right) is the overexposed area. This feature shows these overexposed area like below (blinking on and off).

Blinking on and off

The blinking area in the highlights display is the overexposed area, in which the bright portions of the subject are whitened out and all gradations of color shades are lost. The area without gradations will not be corrected or compensated after taking a picture.
In such a case, it is better taking a picture again, for example; with avoiding direct sunlight, and/or making the exposure compensation (to minus [-]).You can adjust the exposure settings with the [ADJ.] button.

How to use

  • 1 Go to [Setup] menu > [White Saturation Display], and set to [On]. (Default is [Off].)

    White Saturation Display

  • 2 Go to the Playback mode to show a picture. Press the [DISP.] button repeatedly until the display mode changes to the White Saturation Display.

    DISP. button

  • * The highlights display is for reference only.
 
Answer ID: gr04032
Date created: November 14, 2011
Date modified: --
Product: GR DIGITAL IV
Operating system: --
Category: Hardware Operations
Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Did you visit the FAQ before or after the purchase ?

Before
After

Please send us your feedback on this FAQ.



In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.
Useful LINKs:
Do you need other information? Please click any link you want from the following.

Page Top