GXR FAQs - By Product

[Question] Can I export a specific frame from an MP file into a still image?

You can extract specific frames from an MP file shot using M-Cont Plus, Speed Cont, or Multi-target AF, and save each frame as an individual still image.

  • The individual images in an MP file cannot be deleted separately.
  • The original files will be retained after exportation.

Use the following method to export MP files.

1 Press the playback button and go to the Playback mode.
1 Press the playback button.


2 Use [Fn1], [Fn2], [+] or [-] buttons (Directional pad) to display the MP file you want to export.
The symbol with red frames in the figure below is for MP files.

2 Press the [ADJ./OK] button up and down and to the left and right to display the MP file you want to export.


3 Press the [MENU/OK] button. The playback menu appears.
Press the [MENU/OK] button.
Press [+] [-] buttons to select [Export Still Images]. In order to move to the next page in the menu, press [-] button down at the last bottom item, or just press [-] button while pressing and holding the [DIRECT] button.
Choose [Export Still Images] in the Playback menu.


4 Press the [Fn2] button.
Choose an option from [1 Frame] [Sel Mult] or [All Frames] using [+] [-] buttons.
Choose an option from [1 Frame] [Sel Mult] or [All Frames].

  • *Selected [1 Frame] option example
5 [Selecting 1 Frame]

Press [+] [-] buttons to choose [1 Frame] option, press the [MENU/OK] button. Display the frame for exporting using [Fn1] [Fn2] buttons, and then press the [MENU/OK] button.

 
[Selecting multi frames]
Press [+] [-] buttons to choose [Sel Multi] option, press the [MENU/OK] button. Choose [Sel. Indiv.] or [Sel. Range] using [Fn1] [Fn2] buttons, and then press the [MENU/OK] button.

5 Press the [ADJ./OK] button up and down to select [1 Frame]. Press the [ADJ./OK] button to the right and left to select the frame that you want to save as a still image.


If you have selected [Sel. Indiv.]
Press the [+] [-] [Fn1] [Fn2] buttons (Directional pad) to select the frames that you want to save as still images, and press the [MENU/OK] button to select each frame at a time.
If you make a mistake when selecting a frame, you can cancel it by pressing the [MENU/OK] button again.
Use this procedure to specify all frames that you want to turn into still images. A symbol appears on each selected image. (See the symbols with red borders below)

A symbol appears on each selected image.
After selections, press Macro/OK button, and choose [Yes] with the [Fn2] button, and then press the [MENU/OK] button.
If you have selected [Sel. Range]
Press the [+] [-] [Fn1], or [Fn2] buttons to select the starting point for the range of frames you want to specify, and press the [MENU/OK] button.
If you make a mistake when selecting, pressing the DISP. button will return to the starting frame selection screen, or pressing the ADJ. button will switch to the selection individually.
If you have selected [Sel. Range]
The starting frame will be displayed with white borders.
After selecting the starting frame, move to the end point for the range of frames you want to specify. Press the MENU/OK button again. If you make a mistake of selection, press the DISP. button to cancel it.
After the range selections, press
Macro/OK button, and press [Fn2] button to select YES, then press the MENU/OK button.

 

[Selecting all frames]

Press the [+] [-] [Fn1], or [Fn2] buttons to select [All Frames] and press the [MENU/OK] button, and press [Fn2] button to select YES, and then press the MENU/OK button.
Answer ID: EDXR03069
Date created: July 2, 2010
Date modified: July 6, 2010
Product: GXR (RICOH LENS P10 28-300mm F3.5-5.6 VC)
Operating system:   --
Category: Hardware operations
Was this information helpful ?
Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant
Which model(s) in the FAQ did you search ?

GXR with GR LENS A12 28mm
GXR with GR LENS A12 50mm
GXR with RICOH LENS S10 24-72mm
GXR with RICOH LENS P10 28-300mm

Did you visit the FAQ before or after the purchase ?

Before
After

Please send us your feedback on this FAQ.




In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.
Useful LINKs:
Do you need other information? Please click any link you want from the following.

FAQs - By Product Top
FAQs - All models (General hints & tips)
Troubleshooting / Failure diagnosis
FAQs Top
Support Top

Page Top