GXR FAQs - By Product

[Question] Details on the HA-3, optional hood & adapter for the GXR (S10).

It is HA-3, the hood & adapter that you can use with the GXR with RICOH LENS S10 24-72mm F2.5-4.4 VC.
By attaching this HA-3 (adapter), you can use the optional wide conversion lens (DW-6), the optional tele conversion lens (TC-1), or a commercially available filter (filter diameter 43 mm) with the GXR (S10).

HA-3, hood & adapter

Hood

Size Maximum diameter ø 53.0 mm x Full length 26.6 mm
Weight Approx. 7 g

Adapter

Size Maximum diameter ø 51.5 mm x Full length 35.1 mm
Weight Approx. 14 g
Mounting instructions and cautions are as follows.

Attaching the adapter

1. Attach the camera unit (RICOH LENS S10 23-72mm F2.5-4.4 VC) to the GXR body.
See the FAQ below about how to attach them.

How to attach the camera unit to the GXR body.

2. Remove the ring cap from the camera body.
Remove the ring cap (2) by turning the ring cap counterclockwise (1) while pressing the ring cap release button.

Turn the ring cap counterclockwise for removal.

[Note]
Keep the removed ring cap with care. For use, attach the ring cap to the camera body by aligning the markings, and then turn the ring cap clockwise to return it to its original position. The red mark in the figure above is a guide.

3. Attaching the adapter.
With the marking on the camera, fit the adapter into the camera body (1). Then turn the adapter clockwise until it clicks in position (2). The red mark in the figure below is a guide.

With the marking on the camera, fit the adapter into the camera body.
For removal, while pressing the ring cap removal button, turn it counterclockwise.

Attaching the hood

1. Attach the hood to the adapter by aligning the tab (with red marked in the figure below) on the food with the notch (with red marked in the figure below) on the adapter.

Attach the hood to the adapter.

[Using a filter (commercially available)]
For using a filter (filter diameter 43 mm), screw the filter into the adapter.

Attaching a commercially available filter
  • Use a filter available on the market . The filter diameter must be 43 mm.
  • The hood can be attached to the adapter at the same time.

Note on the usage of a filter: Some filters may give shadows (vignetting) to pictures.
Check this before purchase.
If the filter is thick, you may not be able to attach the hood. Check this before purchase.

Caution on the usage of HA-3

  • Turn off the camera power for attachment or detachment.
  • Do not apply force more than necessary for attachment or detachment, or the camera may be damaged.
  • Be sure the hood is correctly attached to the adapter. If the hood is not correctly attached, vignetting may appear on the picture display.
  • The hood is made of rubber. Be carefully not to forcefully change the shape of the hood or allow it to become deformed as this could damage the shape of the hood. Be especially careful when carrying the hood.

Safety Precautions

[Warning] : Do not look at the sun directly through the lens, or you may lose your eyesight.

[Caution]
  • Do not leave the lens or the lens-attached camera under direct sunlight.
  • If sunlight is focused on a nearby item, a fire may occur. Store the product with lens cap or under no direct sunlight.

Handling Notes

  • Be careful not to stain or damage the adapter, or the contact points of the camera body. Otherwise, camera may not be able to recognize the attached option correctly, or to record images with correct information.
  • When the adapter or hood is attached to the camera, do not hold the camera by the adapter or hood alone.
  • Do not directly touch the lens surface. Spots on the lens surface may affect the picture quality. To wipe off spots from the lens surface, use commercially available lens cleaner.
  • Be sure not to give it a shock, such as dropping it, or hitting it against hard items.
  • In an environment where the temperature changes suddenly, condensation may occur in the product, resulting in troubles such as rust or molds. For lens care, take it out of the bag after the temperature difference from the atmosphere has decreased to a fairly small amount.
  • Avoid high temperature or humidity and store the product in a dry place.
 

Answer ID: EDXR02056
Date created: April 12, 2010
Date modified: --
Product: GXR (RICOH LENS S10 24-72mm F2.5-4.4 VC)
Operating system: --
Category: Hardware specifications


Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Which model(s) in the FAQ did you search ?

GXR with GR LENS A12 28mm
GXR with GR LENS A12 50mm
GXR with RICOH LENS S10 24-72mm
GXR with RICOH LENS P10 28-300mm

Did you visit the FAQ before or after the purchase ?

Before
After

Please send us your feedback on this FAQ.



In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.
Useful LINKs:
Do you need other information? Please click any link you want from the following.

Page Top