GXR FAQs - By Product

[Question] About the Flag function setting.

You can assign image files to [Flag Function Setting]. Assigned images can be recalled at a later time from [Flag Function Display] in the Playback menu.

Up to 20 images can be assigned to [Flag Function Settings].

The procedures for assigning files to [Flag Function Setting] and canceling their settings are shown below.

1 Press the playback button to go to the playback mode.
  Press the playback button.

2 Press [Fn1] [Fn2] [+] [-] buttons (Directional pad) to display the file you want to assign or cancel, and press the [MENU/OK] button.
  Press the [ADJ./OK] button.

3 The playback menu appears. Choose the [Flag Function Setting] with [+] [-] buttons, and press the [Fn2] button.
  select [Flag Function Setting]

4 Choose [Cancel] or [Set] with [+] [-] button, and press the [MENU/OK] button.
  [Set]

When a file has been assigned, the symbol appears on the screen. The symbol disappears when the Flag Function Setting has been set to [Deselect].

5 To assign / deselect multiple files at the same time, press the wide-angle button (lower side on the zoom button) in the step 2 above to go to the thumbnail View, and press the [MENU/OK] button.
  Press the wide-angle button (lower side on the zoom button)

6 Proceed to the step 3 above. The thumbnail view will be displayed.
  Press the [DISP.] button

Choose a file in the thumbnail view with [Fn1] [Fn2] [+] [-] buttons (Directional pad), to display the file you want to set or cancel for the flag assignment, and press the [MENU/OK] button.
If you choose a wrong file, press the [MENU/OK] button again to deselect the file.
The flag symbol will be displayed. Up to 20 files can be assigned.

[Caution]

    • If the name of the file assigned to [Flag Function Setting] is changed using a computer, the file is canceled from [Flag Function Setting].
    • When the contents of the internal memory are copied to an SD memory card, the files assigned to [Flag Function Setting] in the internal memory are canceled.
    • When a file in an SD memory card is assigned to [Flag Function Setting], the [CLIPINFO] folder and CLIP.CLI file are created on the SD memory card. If these are deleted, the corresponding file is canceled from [Flag Function Setting].
    • If the name of an image file is changed using a computer, the file may not be able to be assigned to [Flag Function Setting].
    • Only images taken using this camera can be assigned to [Flag Function Setting].
 
Answer ID: EDXR01038
Date created: July 2, 2010
Date modified: July 6, 2010
Product: GXR (GR LENS A12 50mm F2.5 MACRO), GXR (RICOH LENS S10 24-72mm F2.5-4.4 VC), GXR (RICOH LENS P10 28-300mm F3.5-5.6 VC)
Operating system:   --
Category: Hardware operations

Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Which model(s) in the FAQ did you search ?

GXR with GR LENS A12 28mm
GXR with GR LENS A12 50mm
GXR with RICOH LENS S10 24-72mm
GXR with RICOH LENS P10 28-300mm

Did you visit the FAQ before or after the purchase ?

Before
After

Please send us your feedback on this FAQ.




In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.

Useful LINKs:

Do you need other information? Please click any link you want from the following.

Page Top