CX3 FAQs - By Product

[Question] What is the option of date view at playback ?

In thumbnail view at playback, preview by date option is available.

The thumbnail view by date is available with the following steps.
In 81 thumbnail view, turning the zoom lever toward thumbnail view icon (left direction) makes the thumbnail view by date.
Pressing the DISP. button at this screen will allow you to switch the thumbnail list (that you can select an image in the screen) and the date list. In the date list screen, ADJ./OK button left or right Right-left will switch a screen by date, ADJ./OK button up or down UP or downwill switch a screen by page.
To return to preview of a single picture, choose an image in the thumbnail list, and then press the ADJ./OK button. Or turn the zoom lever 3 times towardenlarge view icon(right direction).


  • 1Press the Playback button to go to the playback mode.
    If the camera power is turned off, press and hold the Playback button about 1 second or over, so that the camera will start up in the playback mode.
    Press the Playback button to go to the playback mode.

  • 2Turning the zoom lever to the left (toward thumbnail) will change the screen to the thumbnail view with 20 frames.
    Turn the zoom lever to the left.
    Turning the zoom lever again toward the left thumbnail view icon will change the screen to the thumbnail view with 81 frames.
    20 frames and 81 frames
    20 frames view (left) and 81 frames view (right)

  • 3In the 81 thumbnail view, turning the zoom lever again toward the left thumbnail view icon will change the screen to the thumbnail view by date. The images that was recorded in the same date will be listed like below.
    Thumbnail view by date*1

    To move a screen to another date, press the DISP. button to switch the Date list screen (the figure below *2). And then pressing the ADJ./OK button left or right Right-left will move by date, pressing the ADJ./OK button up or downUP or downwill move by page.
    Example : Picture Quality/Size is selected.*2

    To return to preview of a single picture, go back to the thumbnail view (the figure above *1) and choose an image in the thumbnail list, and then press the ADJ./OK button. Or turn the zoom lever 3 times toward enlarge view icon (right direction).
 
Answer ID: EDC03100
Date created: February 3, 2010
Date modified: --
Product: CX3
Operating system: --
Category: Hardware specifications, Hardware operations
Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Did you visit the FAQ before or after the purchase ?

Before
After

Please send us your feedback on this FAQ.



In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.
Useful LINKs:

Do you need other information? Please click any link you want from the following.

Page Top