CX3 FAQs - By Product
[Question] About the [Pre-AF] feature.
When the [Pre-AF] feature is enabled, the camera will do preliminary work with focus, corresponding with changes on the subject, even if you will not yet press the shutter release half way.
The Pre-AF feature will perform when camera finds a movement of the subject, which will make focusing speed with the half-press faster, then which allows you to take a picture faster.
For the operations on the Shooting menu, see the FAQ below.
In the Shooting menu, press the [ADJ./OK] button
to select [Pre-AF], and then press to the right
Press the [ADJ./OK] button to select [On], and press the [ADJ./OK] button again.
The Pre-AF feature is available when the [Focus] is set to either [Multi AF], [Spot AF], [Face-Pri.AF], [Continuous AF], or [Multi-trgt AF].
- •The Pre -AF is not available when the focus mode is set to either [MF], [Snap] or [infinity ∞].
Date created: February 3, 2010
Date modified: --
Operating system: --
Category: Hardware Specifications, Hardware Operations
Do you need other information? Please click any link you want from the following.