CX3 FAQs - By Product

[Question] About the [Pre-AF] feature.

When the [Pre-AF] feature is enabled, the camera will do preliminary work with focus, corresponding with changes on the subject, even if you will not yet press the shutter release half way.
The Pre-AF feature will perform when camera finds a movement of the subject, which will make focusing speed with the half-press faster, then which allows you to take a picture faster.

The Pre-AF feature options are available in the following; in the Shooting menu - [Pre-AF].
For the operations on the Shooting menu, see the FAQ below.

In the Shooting menu, press the [ADJ./OK] button Up or down to select [Pre-AF], and then press to the right Right (Flash).
The Shooting menu - [Pre-AF] ON
Press the [ADJ./OK] button Up or down to select [On], and press the [ADJ./OK] button again.

The Pre-AF feature is available when the [Focus] is set to either [Multi AF], [Spot AF], [Face-Pri.AF], [Continuous AF], or [Multi-trgt AF].

Pre-AF is available when the [Focus] is set to either [Multi AF], [Spot AF], [Face-Pri.AF], [Continuous AF], or [Multi-trgt AF].

    • The Pre -AF is not available when the focus mode is set to either [MF], [Snap] or [infinity ∞].
Answer ID: EDC03079
Date created: February 3, 2010
Date modified: --
Product: CX3
Operating system: --
Category: Hardware Specifications, Hardware Operations
Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Did you visit the FAQ before or after the purchase ?


Please send us your feedback on this FAQ.

In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.
Useful LINKs:

Do you need other information? Please click any link you want from the following.

Page Top