CX3 FAQs - By Product

[Question] About the Grid guide display options.

This is the option to show a framing grid in the picture display during shooting. The grid will not be recorded in the actual picture.

Pressing the DISP. button will switch a display option. The Grid Guide Display will be shown by clicking the DISP. button several times.
DISP button to switch the display option
Three grid options are available.

Items Description
3x3 grid 3 x 3 grid. This will be useful for composing in three partitions
4x4 grid with diagonal lines 4 x 4 grid with diagonal lines.
Which will be easy to compose the center of the subject. It will be useful for photographing of buildings or goods.
2x2 grid 2 x 2 grid but no line in the center area.
Which will be easy to view the subject in the picture display. This grid will be also good for capturing a moving subject.
  • *These grid options are selectable in the [Grid Guide Display Options] in the Setup menu.
  About the Setup menu operations.

  In the Setup menu, press the ADJ./OK button Up or down , choose the [Grid Guide Display Options], and then press the ADJ./OK button to the right Right (Flash).
  Grid Guide Dispaly Options menu
Press the ADJ./OK button , choose a gride guide option, and press the ADJ./OK button.
Answer ID: EDC03029
Date created: February 19, 2010
Date modified: --
Product: CX3
Operating system: --
Category: Hardware specifications

Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Did you visit the FAQ before or after the purchase ?

Before
After

Please send us your feedback on this FAQ.



In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.

Useful LINKs:
Do you need other information? Please click any link you want from the following.

Page Top