CX3 FAQs - By Product

[Question] What is the Auto resize zoom?

This function allows you to crop and record a shot image. Conventional digital zoom enlarges a portion of an image to a set magnification. Whereas, auto resize zoom saves the cropped portion of the image, the image quality is not decreased by enlargement. The image recording size changes depending on the auto resize zoom magnification.

Auto resize zoom is available only when [Picture Quality/Size] is set to 10M 4:3F, 10M 4:3N (3648 × 2736) only.

Example: 10M 4:3 (3648 x 2736) image (original)

Example: [10M] 4:3 (3648 x 2736) image (original)

Auto resize zoom

Auto resize zoom crops an image with 10M, to 5M 4:3F, 3M 4:3F, 1M 4:3F, or VGA 4:3F (same magnification) without enlargement.

Cropped image examples : images are simulated.

Cropped image examples : images are simulated.

As shown above, you can save the cropped image. Regardless of the magnification ratio, the image quality of the cropped image is as same as the original one. (However, when you increase the magnification ratio, the image size will become smaller.)

Zoom Magnification Focal Length Image Size
Approx. 1.0x 300mm 10M4:3F,10M4:3N
Approx. 1.4x 420mm 5M4:3F
Approx. 1.8x 530mm 3M4:3F
Approx. 2.9x 850mm 1M4:3F
Approx. 5.7x 1710mm VGA4:3F

  • *Values of the focal length are equivalent to those on 35 mm filmcameras.
Digital Zoom
The digital zoom enlarges a cropped image with interpolation. The higher digital zooming, the larger magnification with the smaller area. The image size (pixel dimensions) is the same as the original one, and it looks as if it were the extension of digital zoom, however, it is grainy and has a lot of noise.

Example: An enlargement of a trimmed (cropped) image
(from the left; original image >> trimming >> enlarging)

Example: An enlargement of a trimmed (cropped) image

[Note]

The auto resize zoom feature works with only 4:3F, 4:3N in [Picture Quality/Size]. With other settings, the digital zoom becomes enabled.
The digital zoom is enabled when Scene mode is set to [Skew Correct Mode], even when [Auto Resize] has been selected.
If Auto resize zoom is used with the picture quality set to [Normal] mode, the compression ratio changes to [Fine] mode when recording.

[Setting Auto Resize Zoom]

Auto Resize Zoom options are located; Setup menu > [Digital Zoom Image]. See the FAQ below for the Setup menu operations.
[About the Setup menu operations.]

1 In the Setup menu, press the ADJ./OK button Up or down, and choose [Digital Zoom Image], and then press the ADJ./OK button to the right Right (Flash) to show the options.
  Digital zoom Image options in the Setup menu

2 Press the [ADJ./OK] button Up or down, and choose [Auto Resize], and press the ADJ./OK button.

3   Press and hold the zoom lever to the right (Enlarge) until the maximum magnification is reached on the zoom bar, then momentarily release the zoom lever, and then press the zoom lever to the right (Enlarged View) again.
  zoom lever
Each time you press the zoom lever towards telephoto, the image is resized by one setting.
The size at which the image is recorded is displayed above the zoom bar.
Answer ID: EDC03028
Date created: February 19, 2010
Date modified: December 9, 2010
Product: CX3
Operating system: --
Category: Hardware specifications

Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Did you visit the FAQ before or after the purchase ?

Before
After

Please send us your feedback on this FAQ.




In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.

Useful LINKs:

Do you need other information? Please click any link you want from the following.

Page Top