GR DIGITAL III FAQs - By Product

[Question] How do I assign functions to the ADJ. lever?

Assigning functions to the ADJ. lever allows you to quickly display various shooting setting screens with fewer button operations and without displaying shooting menu.
You can assign functions to the ADJ. lever using [ADJ Lever Setting 1] ~ [ADJ Lever Setting 4].

The functions that can be assigned to the ADJ. lever are shown below.
• As default, functions are already assigned to the lever (see the chart below), but these can be changed to the following functions.

[Shooting modes except for the SCENE mode]

Off
Exposure Comp.
White Balance
  • (* Default setting for [ADJ Lever Setting 1])
WB Correction
ISO
  • (* Default setting for [ADJ Lever Setting 2])
Quality
  • (* Default setting for [ADJ Lever Setting 3])
Focus
Image
  • (* Default setting for [ADJ Lever Setting 4])
Expo. Metering
Cont. Mode
Auto Bracket
Flash Comp.
Flash Amount

In the SCENE mode, the ADJ Lever is assigned as follows. The items are fixed and the ADJ Lever assignment is unavailable.

Scene mode Option
Movie White Balance
Text Density
Skew Correct Exposure Comp., White Balance
Dynamic Range Double shot Exposure Comp., White Balance

The procedures for assigning functions to [ADJ Lever Setting 1] ~ [ADJ Lever Setting 4] are shown below.

1 Press the [MENU/OK] button. The Shooting menu appears.
1 Press the [MENU/OK] button. The Shooting menu appears.
If In the SCENE mode, select the [MODE] tab by pressing Left. Then press Down twice to display the [Key Custom Options] menu.


2 Select the tab on the left in the screen by pressing Left, and select the Key Custom Options tab using Up or Down.
2. Select the tab on the left in the screen by pressing left, and select the Key Custom Options tab using up or down.


3 Press Right, select [ADJ Lever Setting 1] ~ [ADJ Lever Setting 4] using Up or Down , and press Right again.
3 Press Right, select [ADJ Lever Setting 1] ~ [ADJ Lever Setting 4] using Up or Down , and press Right again.
Select the option by pressing Up or Down. In this example, [ADJ Lever Setting 1] is selected.


4 Press the [MENU/OK] button. Or, press Left and then press the [MENU/OK] button.
The option selected in step 3 is assigned to [ADJ Lever Setting 1].


[Using ADJ. Lever]
In order to select an option currently assigned to the ADJ. Lever, press the ADJ. lever while the camera is in a Shooting mode. After the camera has changed into ADJ. mode, press the ADJ. Lever to the left or right, or press Left or Right to select an option. In the example below, [White Balance], [ISO], [Picture Quality] and [Image Settings] have been assigned to [ADJ Lever Setting 1] ~ [ADJ Lever Setting 4].

[White Balance], [ISO], [Picture Quality] and [Image Settings] have been assigned to [ADJ Lever Setting 1] ~ [ADJ Lever Setting 4].

Press Up or Down to select a value in a desired ADJ. Lever setting, and press the ADJ. lever or press the [MENU/OK] button to fix the setting.
 
Answer ID: EDCG09321
Date created: October 22, 2009
Date modified: --
Product: GR DIGITAL III
Operating system: --
Category: Hardware Operations
Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Did you visit the FAQ before or after the purchase ?

Before
After

Please send us your feedback on this FAQ.



In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.

Page Top