GR DIGITAL III FAQs - By Product

[Question] Details on Electronic Level setting.

The tilt indicator and level beep allow you to check whether the subject is level or not.
Use when shooting level subjects such as landscapes and building. It is particularly useful for compositions in which the horizon is visible.

You can adjust the Level setting in the Setup menu or by using the [DISP.] button. This section explains the level settings using the [DISP.] button.


1. Press and hold the [DISP.] button when the camera is ready to shoot.
  Press the [DISP.] button
2. The options will be displayed after about 2 seconds.
  The options will be displayed after about 2 seconds

3. Select the desired setting using Up Down, and press the [MENU/OK] button.

The following settings are available.
Option Description
Off The tilt indicator is not displayed.
Display The tilt indicator is displayed.
Disp + Snd The tilt indicator is displayed and the level beep sounds periodically when the camera is level.
Sound The level beep sounds periodically when the camera is level. The tilt indicator is not displayed.

[Note]
The tilt indicator is displayed in the Indicator displayed mode, or the Indicator + Histogram mode in the shooting display options.
If the camera is tilted too much, the tilt indicator becomes red and the scale shows in the opposite end of the direction which a camera tilted to.
The tilt indicator works even if the camera is in the lengthwise direction.
You can change the Level setting options also in the Setup menu.
The tilt beep will not sound if the [Volume Settings] has been muted (off), even if [Disp + Snd] or [Sound] have been selected in the [Level Settings].The [Volume Settings] options are available in the Setup menu.
Details on the Setup menu operations.


Camera level
Camera level

Camera tilted to the right
Camera tilted to the right

Unable to measure tilt
Unable to measure tilt*1

Camera in the lengthwise direction
Camera in the lengthwise direction


  • *1The tilt indicator turns red if the camera is tilted too far forward or backwards, or if the camera is unable to detect any tilt.

Answer ID: EDCG09307
Date created: October 22, 2009
Date modified: --
Product: GR DIGITAL III
Operating system: --
Category: Hardware Operations


Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Did you visit the FAQ before or after the purchase ?

Before
After

Please send us your feedback on this FAQ.



In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.


Useful LINKs:
Do you need other information? Please click any link you want from the following.

Page Top