CX2 FAQs - By Product

[Question] How do I fix the focal length of the zoom at 8 levels? (Step Zoom)

Step zooming allows you to set the focal length of the zoom so that it is fixed at 8 levels (28, 35, 50, 85, 105, 135, 200, 300 mm *1).
  • *1:Equivalent to that on 35 mm filmcameras

The default setting is [OFF].
The options of this mode is available in the Setup menu.

[About the Setup menu operations.]

The procedures for setting step zoom are shown below.

In the Setup menu, press the [ADJ./OK] button Up or down to select [Step Zoom], and then press the [ADJ./OK] button Right.

Step zoom

Press the [ADJ./OK] button Up Down to select [On], and then press the [ADJ./OK] button to confirm the setting.
In Macro mode, the step zoom focal lengths are roughly equivalent to 31, 35, 50, 85, 105, 135, 200, or 300 mm on 35 mm filmcameras.
Assigning [Step Zoom] to the Fn (Function) button with [Set Fn Button] allows you to toggle the step zoom on and off by pressing the Fn button.
For the details on the Fn button registration, see the FAQ below.
[How do I assign a function to the Fn (Function) button?]
Answer ID: EDC09245
Date created: September 4, 2009
Date modified: --
Product: CX2
Operating system: --
Category: Hardware Operations
Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Did you visit the FAQ before or after the purchase ?


Please send us your feedback on this FAQ.

In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.

Useful LINKs:
Do you need other information? Please click any link you want from the following.

Page Top