CX2 FAQs - By Product

[Question] How do I adjust the light intensity of the flash (Flash exposure compensation)?

You can set the light intensity from -2.0 EV to +2.0 EV in increments of 1/3 EV.

The procedures for this setting are shown below.

  • 1 Turn the mode dial to a shooting mode.
  • Turn the mode dial to a shooting mode.

  • 2 Press the [MENU] button to display the shooting menu.
  • Press the [MENU] button to display the shooting menu.

  • 3 Press the [ADJ./OK] button Down to select [Flash Exposure Compensation], and press the button Right.
  • Press the [ADJ./OK] button down to select [Flash Exposure Compensation], and press the button to the right.
  • Press the [ADJ./OK] button down to select [Flash Exposure Compensation], and press the button to the right.

  • 4 The flash exposure compensation bar appears.
  • The flash exposure compensation bar appears.
  • Press the [ADJ./OK] button Up Down to make the setting.

  • 5 Press the [ADJ./OK] button.
    The setting appears on the screen, except when the flash mode has been set to [Flash Off].
  • The setting appears on the screen, except when the flash mode has been set to [Flash Off].

[Caution]
Flash exposure compensation may not work outside the flash range.
[Note]
For information on how to use the flash, see Let me know about the flash.
 
Answer ID: EDC09239
Date created: September 4, 2009
Date modified: --
Product: CX2
Operating system: --
Category: Hardware Operations


Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Did you visit the FAQ before or after the purchase ?

Before
After

Please send us your feedback on this FAQ.




In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.

Useful LINKs:
Do you need other information? Please click any link you want from the following.

Page Top