CX2 FAQs - By Product
[Question] How do I assign functions to the [ADJ./OK] button?
When functions are assigned to the [ADJ./OK] button, you can display various shooting setting screens with fewer button operations and without displaying the shooting menu. You can use [ADJ Button Setting 1] to [ADJ Button Setting 4] to assign camera functions that can be activated by pressing the [ADJ./OK] button.[Note]
The following functions can be assigned to the [ADJ./OK] button.
| White Balance
- *The Density is only available in the Text mode in the SCENE mode and which has been registered as default.
The procedures for assigning functions to [ADJ Button Setting 1] to [ADJ Button Setting 4] are shown below.
|1||With camera power on, press the [MENU] button.|
|2||Press the [ADJ./OK] button , and then press to display the setup menu.|
||Press the [ADJ./OK] button , and then press to select [ADJ Button Setting 1] - [ADJ Button Setting 4]. Press the [ADJ./OK] button .|
||Press the [ADJ./OK] button to select the desired setting, and then press the [ADJ./OK] button.|
If you press the [ADJ./OK] button in a shooting mode, the functions that have been set in ADJ. mode are displayed.
Press the [ADJ./OK] button to select the item that you want to set.
The items that can be set for each shooting mode are shown below.
- *The items for Scene mode (except for Discreet mode), Easy shooting mode, and Movie mode are fixed and cannot be changed.
Date created: September 4, 2009
Date modified: --
Operating system: --
Category: Hardware Operations
Do you need other information? Please click any link you want from the following.