CX2 FAQs - By Product
[Question] How do I set the LCD image confirmation time?
Immediately after you press the shutter release button, the still image that you have taken remains displayed on the screen for a moment so you can check it. By default, the image confirmation time is set to 0.5 seconds, but this can be changed.
|Off (The image is not displayed for confirmation.)|
|0.5 seconds *Default setting|
|Hold (The image remains displayed until the next time you half-press the shutter release button.)|
1Press the [MENU] button. The shooting menu or playback menu appears.
2Press the [ADJ./OK] button , and then press . The setup menu appears.
3Press the [ADJ./OK] button , press to select [LCD Confirmation Time], and then press the button .
4Press the [ADJ./OK] button to select the desired setting, and then press the [ADJ./OK] button.
If you set [LCD Confirmation Time] to [Hold], you can also enlarge or delete the displayed image.
Date created: October 8, 2009
Date modified: --
Operating system: --
Category: Hardware Operations
Do you need other information? Please click any link you want from the following.