CX2 FAQs - By Product

[Question] How do I change the picture quality and image size?

The procedures for changing picture quality and image size are shown below.

  1. 1Turn the mode dial to a shooting mode.

    Turn the mode dial to a shooting mode.

  2. 2Press the [MENU] button to display the shooting menu.

    Press the [MENU] button to display the shooting menu.

  3. 3Press the [ADJ./OK] button Down to select [Picture Quality/Size], and then press the button Right.

    Press the [ADJ./OK] button

    select [Picture Quality/Size]

  4. In the Movie mode, select [Movie Size], and press the buttonRight .

    select [Movie Size]

  5. 4Press the [ADJ./OK] button Up Down to select the desired setting.
  6. 5Press the [ADJ./OK] button.

    The display returns to the shooting screen, and a symbol appears on the picture display.

    (Sample with [Picture Quality/Size] set to [1:1 (6M)])

    Sample with [Picture Quality/Size] set to [1:1 (6M)]

    • *The above image shows the picture display when the shooting information display frame has been set to [On].

    What is the Shooting Info. Display Frame?

Answer ID: EDC09217
Date created: October 8, 2009
Date modified: --
Product: CX2
Operating system: --
Category: Hardware Operations
Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Did you visit the FAQ before or after the purchase ?


Please send us your feedback on this FAQ.

In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.

Useful LINKs:

Do you need other information? Please click any link you want from the following.

Page Top