CX1 FAQs - By Product

[Question] How do I playback MP files?

When you shoot still images with M-Cont Plus, Speed Cont, or Multi-target AF, the images are recorded as one MP file.

• Images shot in normal Continuous mode can be played back in the same way as normal still images.
• The focus position is displayed for Multi-target AF shooting.

Use the following method to playback MP files.


1 Press the playback button.
1 Press the playback button.
The most recently shot file is displayed. If this is a movie file, the first frame of the movie is displayed as a still image.


2 Press the [ADJ./OK] button Up Down Left Right to display the MP file you want to playback.
2 Press the [ADJ./OK] button up and down and to the left and right to display the MP file you want to playback.
A symbol with red borders is displayed for MP files.
A symbol with red borders is displayed for MP files.


3 The procedures for changing the display are shown below.

Display as above

Press the [DISP.] button to change between "Normal" and "No Display".
The images cannot be enlarged even if you turn the zoom lever to the right (Enlarged View). The images are displayed in thumbnail view.
The other operations are the same as those for normal still images.
Display as above


  Thumbnail view
Turn the zoom lever to display the thumbnail view.
Thumbnail view
The file's frames are displayed in thumbnail view.
The image in the top left-hand corner is the MP file. A symbol (with red borders) is displayed.
Press the [ADJ./OK] button Up Down Left Right to select a frame.
Turn the zoom lever to the right (Enlarged View) to switch to the single image view.
The [DISP.] button is disabled.


  Slide Show
Press the [ADJ./OK] button to start the slide show.
Images are displayed automatically in the order they were consecutively shot, starting with the displayed frame.
Operations during the slide show are shown below.
Pause/Playback Press the [ADJ./OK] button.
Fast Forward Turn and hold the zoom lever to the right during playback.
Rewind Turn and hold the zoom lever to the left during playback.
Slow Playback Turn and hold the zoom lever to the right during pause.
Slow Rewind Turn and hold the zoom lever to the left during pause.
Next Frame Turn the lever to the right during pause.
Previous Frame Turn the lever to the left during pause.
First Frame Press the [ADJ./OK] button to the left during pause.
Last Frame Press the [ADJ./OK] button to the right during pause.


4 To play back files other than MP files, return to Step 2 and press the [ADJ./OK] button Up Down Left Right.


The [DPOF], [Trim], [Resize], [Skew Correction] (playback mode), [Level Compensation], and [White Balance Compensation] functions are not available for MP files.
[Flag Function Setting] and [Protect] cannot be set for individual frames in an MP file. If [Flag Function Setting] or [Protect] is set when the thumbnail view or single image view is displayed, the setting will be applied to the MP file instead of an individual frame.
 

Answer ID: EDC09023
Date created: July 9, 2009
Date modified: --
Product: CX1
Operating system: --
Category: Hardware Operations


Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Did you visit the FAQ before or after the purchase ?

Before
After

Please send us your feedback on this FAQ.


In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.

Useful LINKs:

Do you need other information? Please click any link you want from the following.

Page Top