CX1 FAQs - By Product


[Question] Let me know about the movie shooting.


You can shoot movies with sound.
You can set the image size to either 640 x 480 or 320 x 240 pixels. You can also set the number of frames shot per second (frame rate)*1 to either 30 or 15.
Each movie you shoot is recorded as an AVI file.

The flash cannot be used.
While shooting movies, only digital zoom can be used (up to 4.0x).
The remaining recording time may not change uniformly because it is recalculated from the remaining memory capacity during movie recording.
Depending on the remaining battery level, the battery may become depleted during movie shooting. Use of a battery with adequate remaining power, or an AC adapter (optional), is recommended.
Use of a high speed SD memory card with sufficient memory is recommended when shooting for long periods.

The procedures for shooting a movie are shown below.
1 Turn the mode dial to movie Movie mode.
  Turn the mode dial to movie Movie mode.
   
2 Press the shutter release button to start recording the movie.
When the shutter release button is pressed, the camera focuses on the subject.
  Press the shutter release button to start recording the movie.
   
Caution  
While shooting movies, operating sounds may be recorded.
The maximum recording time per shooting depends on the size of your SD memory card. Even if you are within the maximum recording time, recording may end depending on your card.
The maximum recording time per shooting is 90 minutes or the equivalent of 4 GB.
The camera shake correction function cannot be used in Movie mode. If you turn the mode dial to Movie mode while the camera shake correction function is enabled, the camera shake warning symbol disappears from the picture display.
If you shoot a fast-moving subject, it may be distorted in the recorded image.
If you shoot under a fluorescent light, the light's flickering may be recorded as a horizontal band.
   
Image size and frame rate
You can set the image size and frame rate*1 of a movie in the shooting menu.
The shooting menu items for movie mode differ from those in other modes.
   
  • *1A movie consists of many frames whose images appear to be moving displayed at high speed.
    You can set the number of frames shot in one second (frame rate) to [30 Frames/Sec] or [15 Frames/Sec].
    The procedures for setting the frame rate are shown below.
   
1 Turn the mode dial to Movie mode.
   
2 Press the [MENU] button to display the shooting menu.
  Press the [MENU] button to display the shooting menu.
   
3 Press the [ADJ./OK] button Down to select [Frame Rate], and press the button to the right.
  Press the [ADJ./OK] button
select [Frame Rate]
   
4 Press the [ADJ./OK] button Up Down to select [30 Frames/Sec] or [15 Frames/Sec], and then press the [ADJ./OK] button.
   
Movie recording time may vary depending on the capacity of the recording destination (internal memory or SD memory card), shooting conditions, and the type and manufacturer of the SD memory card.
The estimated total recording time is shown below. The maximum recording time per shooting is 90 minutes or the equivalent of 4 GB.
See the FAQ below for estimates of a movie's recording time.

 
Answer ID: EDC09018
Date created: July 9, 2009
Date modified: --
Product: CX1
Operating system: --
Category: Hardware Operations


Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Did you visit the FAQ before or after the purchase ?

Before
After

Please send us your feedback on this FAQ.


In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.

Useful LINKs:

Do you need other information? Please click any link you want from the following.

Page Top