CX1 FAQs - By Product

[Question] What is the Speed Cont?

Speed Cont allows you to record 120 consecutive images in approximately one second (120 frames per second) or approximately 2 seconds (60 frames per second) from the moment that the shutter release button is pressed. The consecutively shot still images are grouped together as a set and are recorded as one MP file*1.

Speed Cont

  • *1 MP (Multi-Picture) file This is a file format that records multiple still images as one file.
  • The time until image recording is complete may be longer when using the internal memory.
  • The flash cannot be used.
  • The camera shake correction function cannot be used in continuous mode. If you turn the mode dial to continuous mode while the camera shake correction function is enabled, the camera shake warning symbol disappears from the picture display.
  • The focus, exposure value, and white balance are locked in Continuous mode.
  • When [Card Sequence No.] is set to [On] and the last four digits of the file number exceed "9999" during continuous shooting, a separate folder is created in the SD memory card and successive pictures taken in continuous mode are stored in this folder.
  • The image size is fixed at N640 x 480 (VGA).

1 Turn the mode dial to Continuous Mode.
 

Turn the mode dial to Continuous Mode.


2 Press the [MENU] button to display the continuous mode selection screen.
 

Press the [MENU] button to display the continuous mode selection screen.


3 Press the [ADJ./OK] button Up Down to select [Speed Cont (Low)] or [Speed Cont (High)] , and then press the [ADJ./OK] button.
 

Press the [ADJ./OK] button up and down to select [Speed Cont (Low)] or [Speed Cont (High)] , and then press the [ADJ./OK] button.

[Speed Cont (Low)]
Continuously shoots 120 images in approximately 2 seconds.
 
  [Speed Cont (Low)]

[Speed Cont (High)]
Continuously shoots 120 images in approximately 1 seconds.
 
  [Speed Cont (High)]

4 Compose your picture, and then press the shutter release button.
  Compose your picture, and then press the shutter release button.
  • 120 consecutive images are taken automatically.
  • If you release the shutter release button before recording of the 120 images is completed, the images are recorded as one MP file, from the time the shutter release button was pressed to the time it was released.

Caution
  • If you shoot a fast-moving subject, it may be distorted in the recorded image.
  • If you shoot under a fluorescent light, the light's flickering may be recorded as a horizontal band.

 
Answer ID: EDC09009
Date created: July 9, 2009
Date modified: --
Product: CX1
Operating system: --
Category: Hardware Operations
Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Did you visit the FAQ before or after the purchase ?

Before
After

Please send us your feedback on this FAQ.




In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.

Useful LINKs:
Do you need other information? Please click any link you want from the following.

Page Top