CX6 : How do I set step zooming ?

Step zooming allows you to move a zoom position to a fixed step quickly as follows.

[Optical zoom] in 8 levels (equivalent to *1: 28, 35, 50, 85, 105, 135, 200, 300 mm)
[Super Resolution zoom] in 2 levels (equivalent to *1: 450, 600 mm)
*1: Equivalent to that on 35 mm film cameras

The default setting is [OFF].
Step zoom options are available in the Setup menu.

In the Setup menu, push the [ADJ./OK] button Up or down to select [Step Zoom], and then push the [ADJ./OK] button Right (Flash).

Step zoom
Push the [ADJ./OK] button Up Down to select [On], and then press the [ADJ./OK] button to confirm the setting.

Memo [Memo]
  • In Macro mode, the step zoom focal lengths are roughly equivalent to 31, 35, 50, 85, 105, 135, 200, or 300 mm on 35 mm film cameras.
  • Assigning [Step Zoom] to the Fn (Function) button with [Set Fn Button] allows you to toggle the step zoom on and off by pressing the Fn button.
Answer ID: edc06045
Date created: December 5, 2011
Date modified: --
Product: CX6
Operating system: --
Category: Hardware operations
Was this information helpful ?
Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant
Did you visit the FAQ before or after the purchase ?
Before
After
Please send us your feedback on this FAQ.


In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.
Useful LINKs:
Do you need other information? Please click any link you want from the following.

Page Top