RICOH imagine.change.Global

CX6 : How do I adjust the light intensity of the flash (Flash exposure compensation)?

You can set the light intensity from -2.0 EV to +2.0 EV in increments of 1/3 EV.

Operating procedure

  • 1Press the [MENU] button to display the shooting menu.

    [MENU] button

  • 2Push the [ADJ./OK] buttonDown to select [Flash Exposure Compensation], and push the button Right (Flash).

    [ADJ./OK] button
    Flash compensation

  • 3The flash exposure compensation bar appears.

    The flash exposure compensation bar.
    Press the [ADJ./OK] buttonUp Down to make the setting.

  • 4Press the [ADJ./OK] button.
    The setting appears on the screen, except when the flash mode has been set to [Flash Off].

    Flash setting example

  • Flash exposure compensation may not work outside the flash range.
    See About the flash. for more information about the flash range.
  • The configured value is displayed when the flash is enabled (other than [Flash Off]). The Flash exposure compensation will not work when the flash mode is set to [Flash Off].
  • For flash operations, see About the flash.
Answer ID: edc06039
Date created: December 5, 2011
Date modified: --
Product: CX6
Operating system: --
Category: Hardware operations
Was this information helpful ?
Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant
Did you visit the FAQ before or after the purchase ?
Please send us your feedback on this FAQ.

In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.
Useful LINKs:
Do you need other information? Please click any link you want from the following.

Page Top