CX5 FAQs - By Product

[Question] What is LCD auto dim mode?

When [LCD Auto Dim] is set to [On], the picture display dims to conserve battery power if the camera is not moved for approximately five seconds. Move the camera or press any button to return to the original picture display brightness. The default setting is [On].

The options of this mode is available in the Setup menu.
[About the Setup menu operations.]

Operating procedure

In the Setup menu, press the [ADJ./OK] button Up Down to select [LCD Auto Dim], and then press it to the right Right (Flash).

Press the [ADJ./OK] button up and down to select [On], and then press the [ADJ./OK] button.

Press the [ADJ./OK] button Up Down to select [On], and then press the [ADJ./OK] button.

The [LCD Auto Dim] setting is disabled in Synchro monitor mode.
Answer ID: edc05043
Date created: March 10, 2010
Date modified: --
Product: CX5
Operating system: --
Category: Hardware specifications
Was this information helpful ?
Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant
Did you visit the FAQ before or after the purchase ?
Please send us your feedback on this FAQ.

In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.
Useful LINKs:
Do you need other information? Please click any link you want from the following.

Page Top