CX4 FAQs - By Product

[Question] About the Date and time setting operations.

[About the Setup menu operations.]

The operations below show the procedure in the Setup menu.

1	Choose [Date Settings] in the Setup menu, and then press .
2	The [Date Settings] will appear on the screen.
	*Using the [ADJ./OK] button allows to change the setting. The [ADJ./OK] button allows to change the item.
	The 3 options of the date format are available. Use the [ADJ./OK] button for the format changes. Y/M/D/ hh:mm example; [2009/09/30 12:30] M D Y hh:mm example; [SEP 30 2009 12:30] D M Y hh:mm example; [30 SEP 2009 12:30]
3	After completed the settings, check to see the selections, and press the [ADJ./OK] button. The confirmation screen will be displayed.
4	Press the [ADJ./OK] button again. The setting is fixed and it returns to the Setup menu. Press the [MENU] button or [ADJ./OK] button to exit the Setup menu.

• •If the battery is removed for more than one week, the date and time settings will be lost. These settings must be made again.
• •In order to retain the date and time settings, load a battery with adequate remaining power for more than two hours.
• •For the Date imprinting, see the FAQ below.

Do you need other information? Please click any link you want from the following.

• FAQs - By Product Top
• FAQs - All models (General hints & tips)
• Troubleshooting / Failure diagnosis
• FAQs Top
• Support Top