CX4 FAQs - By Product / Support / Digital Camera　| Ricoh Global

[Question] How do I adjust the light intensity of the flash (Flash exposure compensation)?

You can set the light intensity from -2.0 EV to +2.0 EV in increments of 1/3 EV.

The procedures for this setting are shown below.

1Turn the mode dial to a shooting mode.
2Press the [MENU] button to display the shooting menu.
3Press the [ADJ./OK] button to select [Flash Exposure Compensation], and press the button .
4The flash exposure compensation bar appears.

Press the [ADJ./OK] button to make the setting.
5Press the [ADJ./OK] button.
The setting appears on the screen, except when the flash mode has been set to [Flash Off].

[Caution]
* Flash exposure compensation may not work outside the flash range.
See About the flash. for more information about the flash range.
* The configured value is displayed when the flash is enabled (other than [Flash Off]). The Flash exposure compensation will not work when the flash mode is set to [Flash Off].
[Note]
For flash operations, see About the flash.

Page Top

Answer ID: edc04039
Date created: November 17, 2010
Date modified: November 19, 2010
Product: CX4
Operating system: --
Category: Hardware operations

Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Did you visit the FAQ before or after the purchase ?

Before
After

Please send us your feedback on this FAQ.

In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.

Useful LINKs:
Do you need other information? Please click any link you want from the following.