CX4 FAQs - By Product

[Question] How do I assign functions to the [ADJ./OK] button?

When functions are assigned to the [ADJ./OK] button, you can display various shooting setting screens with fewer button operations and without displaying the shooting menu.

You can use [ADJ Button Setting 1] to [ADJ Button Setting 4] to assign camera functions that can be activated by pressing the [ADJ./OK] button.
The 5th function is fixed to AE/AF target shift, and it cannot be changed.


[Note]
The following functions can be assigned to the [ADJ./OK] button.
Off
Exposure Comp
(*Default setting for [ADJ Button Setting 1])
White Balance
(*Default setting for [ADJ Button Setting 2])
ISO
(*Default setting for [ADJ Button Setting 3])
Quality
(*Default setting for [ADJ Button Setting 4])
Focus
Image
Expo. Metering
Auto Bracket
Flash Comp.
Density *
  • *The Density is available only in the Text mode in the SCENE mode and which has been registered as default.
The procedures for assigning functions to [ADJ Button Setting 1] to [ADJ Button Setting 4] are shown below.

1 With camera power on, press the [MENU] button.
With camera power on, press the [MENU] button.
   
2 Press the [ADJ./OK] button Left (Macro), and then press Down to display the setup menu.
Press the [ADJ./OK] button to the left, and then press it down. The setup menu appears.
   
3
Press the [ADJ./OK] button Right (Flash), and then press Down to select [ADJ Button Setting 1] - [ADJ Button Setting 4]. Press the [ADJ./OK] button Left (Macro).
Press the [ADJ./OK] button to the left, and then press down to select [ADJ Button Setting 1] - [ADJ Button Setting 4]. Press the [ADJ./OK] button to the right.
   
4  
Press the [ADJ./OK] button Up or down to select the desired setting, and then press the [ADJ./OK] button.
 

If you press the [ADJ./OK] button in a shooting mode, the functions that have been set in ADJ. mode are displayed.

If you press the [ADJ./OK] button in a shooting mode, the functions that have been set in ADJ. mode are displayed.
Press the [ADJ./OK] button Right-left to select the item that you want to set.
The items that can be set vary depending on shooting mode.
The below charts show for the details.
The items that can be set for each shooting mode

The below shows the chart for Continuous, Creative Shooting modes.
The items that can be set for each scene mode
  • [*20]The functions can be assigned but cannot be used.
Answer ID: edc04027
Date created: November 17, 2010
Date modified: --
Product: CX4
Operating system: --
Category: Hardware operations
Was this information helpful ?
Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant
Did you visit the FAQ before or after the purchase ?
Before
After
Please send us your feedback on this FAQ.


In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.

Useful LINKs:

Do you need other information? Please click any link you want from the following.

Page Top