Compatibility information
 |
 |
|
|
| Last updated: December 13, 2007 |
|
This page provides compatibility information between the Mac OS X and Ricoh digital camera products.
|
USB Mass Storage connections
| Model names |
USB mass storage connections on Windows Vista |
GR DIGITAL II
Caplio R7
Caplio GX100
GR DIGITAL
Caplio R6
Caplio 500Gwide
Caplio R5
Caplio R40/R4
Caplio R30/R3
Caplio R2
Caplio GX8
Caplio 400Gwide (*1) |
Supported.
(These models work with the standard USB driver in the operating system.) |
Caplio RR750/RR730
Caplio RR660/RR630
Caplio RR530/RR430
Caplio RR330/RR230
Caplio RR211 |
Supported.
(These models work with the standard USB driver in the operating system.) |
| RDC-5300/5000 |
Not supported.
Use a memory card reader/writer to download a picture to a computer.
(Regarding the models on the left, there is no plan to release the Ricoh original USB driver for Mac OS X.) |
|
1) A firmware upgrade (ver. 3.00 or greater) is required. Click here to go to the download site.
Ricoh software
Compatibility of the Mac OS X 10.5
- Caplio Mounter : Caplio Mounter ver. 5.0 is compatible with Mac OS X 10.5.
- RDC-iMounter : There is no plan to release the supported version. See the following table to download pictures in the supported versions of the operating system.
Also refer to this note.
Compatibility of the Mac OS X
[For GR DIGITAL II/Caplio R7/R6/GX100 users] No software from Ricoh is required. See this FAQ for the details.
| Software |
Supported versions in Mac OS X |
Compatible cameras |
Caplio Mounter
ver. 5.0 |
10.5, 10.4
(Intel / Power PC processors) |
Caplio R5
Caplio 500Gwide
Caplio R40/R4
Caplio R30/R3
GR DIGITAL
Caplio GX8/GX
Caplio R2/R1V/R1/RZ1
Caplio RX
Caplio 400Gwide
Caplio G4/G4wide
Caplio G3/G3S/G3M
Caplio 300G
Caplio RR30 |
Caplio Mounter
ver. 3.0 |
10.3, 10.2,
10.1.2 - 10.1.5
|
RDC-i Mounter
ver. 7.0 |
10.4, 10.3, 10.2,
10.1.2 - 10.1.5
(Power PC processors) |
RDC-7 (*1)
Caplio RR1 (*1)
|
RDC-i Mounter
ver. 5.8 |
10.3, 10.2,
10.1.2 - 10.1.5
|
RDC-7
Caplio RR1
RDC-i700 (*2)
RDC-i500 (*2)
|
|
[Note 1] For RDC-7 / Caplio RR1 models
| * |
There is no RDC-i Mounter software that supports Intel-based Macintosh computers. If you want to transfer images to an Intel-based Macintosh computer, we would recommend using a memory card reader, if you have one. |
[Note 2] For RDC-i700 / RDC-i500 models
| * |
There is no RDC-i Mounter software that is compatible with Mac OS X 10.4 or greater, and the RDC-i700 / RDC-i500 cameras. For both cameras, please use the RDC-i Mounter ver. 5.8 in Mac OS X 10.3 or less versions, or the RDC-i software in Mac OS 9 system. If you want to transfer images in Mac OS X 10.4 or greater, we would recommend using a memory card reader, if you have one. |
Note for other Ricoh camera models that are not listed above
| * |
If your Ricoh software does not support Mac OS X, we recommend using a memory card reader if you have one, or connecting a camera in Mac OS 9. Please see this tip for the details. |
|
|
|
|
