Others

GV-1 External Viewfinder
Optical viewfinder for the GR DIGITAL IV, GR DIGITAL III, GR DIGITAL II and GR DIGITAL cameras. Mounted on hot shoe. Includes 21 mm- and 28 mm-equivalent frames (35 mm film equivalent). Field of view is approximately 90%. Includes case.

• *When the external viewfinder is used with the wide conversion lens or hood, vignetting may occur.
• *Shooting information is not displayed.

GV-2 Mini External viewfinder
Optical mini viewfinder for the GR DIGITAL IV, GR DIGITAL III, GR DIGITAL II and GR Digital cameras. Mounted on hot shoe. Includes 28 mm-equivalent frame (35 mm film equivalent) incorporating 1:1 aspect ratio marks. Field of view is approximately 85%. Includes case.

• *When the external viewfinder is used with the hood, vignetting may occur.
• *Shooting information is not displayed.

VF-1 LCD Viewfinder
This is a LCD viewfinder for the GX200 and Caplio GX100 cameras that connects to the accessory shoe. It achieves 100% field of view equivalent to approx. 201 kilopixels. Includes case. (Included in the GX200 VF KIT and Caplio GX100 VF KIT.)

VF-2 LCD Viewfinder
An LCD viewfinder that attaches to the hot shoe of the camera body. It has a 100% field of view equivalent to approximately 920,000 dots. (Case included)

GF-1 External flash
This external flash can do TTL flash using pre-flash. When the wide-angle diffuser panel is used, a coverage angle equivalent to 18 mm is possible. Uses four AA batteries.

Metal lens cap GL-1　(with function for locking the power button)
This is a metal lens cap for the GR DIGITAL IV. When the metal lens cap is mounted, the GC-3/GC-4 cannot be used.

LC-1 Self-retaining Lens Cap
This is a hinged-type self-retaining lens cap for the GX200 and Caplio GX100 cameras.

• *The HA-2 Hood and Adapter cannot be used when using LC-1.

LC-2 Self-retaining Lens Cap
A hinged-type lens cap that opens and closes automatically.

LC-3 Self-retaining Lens Cap
A hinged-type lens cap that opens and closes automatically.

CA-1 Cable switch
This is a cable switch to operate the camera shutter. Allows half-push and full-push operations. 65 cm total length (from grip end to connector end).

CA-2 Cable switch
This is a cable switch to operate the camera shutter for the GR DIGITAL IV, CX6 camera. Allows half-push and full-push operations. 65 cm total length (from grip end to connector end).

HC-1 HDMI Cable
Used to connect your camera to a television compatible with HDMI.