FV-G030B1
Pre-processing functions and VGA GigE Vision™ for a wide range of uses
Outline･Features
Handles a wide range of inspections, including monochrome image measurement, defect checking, etc. Suitable for applications involving installation in various types of devices that make up a machine vision system.
- ■High-speed frame rate of VGA: 90 fps
- ■High image quality with a CCD global shutter
- ■Camera contains automatic control functions for gain and shutter
- ■Various scan modes (full, AOI) as standard features
- ■Various trigger modes (pulse width, edge preset trigger) as standard features
- ■Supports DC iris lens so also excellent for outdoor monitoring uses
- ■Excellent for industrial uses as it handles a wide voltage range (10.8 - 26.4 V)
- ■Supports updating of camera firmware via Ethernet
- ■In addition to camera tripod screw holes, M4 screw holes are located on two sides (top and bottom)
Sturdy construction for increased mounting precision - ■[Pre-processing functions] reduce PC processing burden and increase image processing performance
[Supported cameras] FV-L200B1, FV-L030B1, FV-G200B1, FV-G030B1
On models with pre-processing functions, the camera incorporates the various image processing functions as shown below. Compared to cameras where there is an intervening board, it is possible to reduce the PC's CPU burden and increase the transfer speed.
- ●[Lookup table] enables finely detailed image creation.
- ●[AGC (auto gain control)] enables automatic gain adjustment in camera
- ●[Auto electronic shutter control] automatically controls the shutter in response to changes in subject light intensity
Dimensions
Product Specifications
| Imager | 1/3" interline VGA monochrome progressive CCD | |
| Active picture elements | VGA:648(H)×494(V) | |
| Cell size | 7.4(H)×7.4(V)μm | |
| Vertical frequency(Frame rate) | 89.91172 Hz at full resolution 0.72028 to 360.33325 Hz adjustable via the communication (Frame rate depends on the AOI setting) Maximum frame rate(360.33325 Hz) is when vertical resolution AOI setting is 104. |
|
| Horizontal frequency | 47.2028 kHz | |
| Pixel frequency | 36.8181 MHz | |
| Minimum scene illumination | 0.58 lux at F1.2, 89.91172 Hz | |
| Sync. System | Internal | |
| Video output | Digital 8, 10 or 12 bit Raw data | |
| Exposure time | Preset continuous mode: 10 μseconds to 16,777,215 μseconds Preset trigger mode: 10 μseconds to 16,777,215 μseconds Pulse width mode: 10 μseconds to Unlimited |
|
| Gain | 0 to 20.4dB | |
| Gamma | Gamma 1.0(Factory default) or uploadable gamma table | |
| Power supply | Input voltage | +10.8 to +26.4Vdc |
| Consumption | Less than 5.0W | |
| Dimensions | 35(W)×35(H)×50.8(D)mm(NOT Including the connector) | |
| Lens mount | C mount | |
| Weight | Approximately 120g | |
| Operational temperature |
Minimum | Environmental temperature -5 deg. C |
| Maximum | Camera housing temperature (top plate) shall not exceed 65℃ (This corresponds to an environmental temperature of approximately 35℃) |
|
| Storage temperature | Environmental temperature -30 to 65 deg. C | |
Related Information
- Download SoftwareDownload software for FA cameras.
- Download User's Guide/Product SpecificationsDownload user's guide and specifications for FA cameras.
*Camera Link and GigE Vision are trademarks of the AIA (Automated Imaging Association).
Please feel free to send us an email with your inquiries about FA･Security.
Brochure PDF
FA Camera and Lens General Brochure
Related
- Notification of PENTAX MV Lenses to be branded RICOH(Chart comparing the PENTAX model names to RICOH model names)
