DVD/CD Drives FAQ for MP7040 series
Does the MP7040A/S support CD-TEXT?
The MP7040A/S alone supports this function with firmware version 1.20 or later. However to use CD-TEXT, it must also be supported by the writing software. Please refer to your software manual or consult with your software supplier.
Sometimes the PC hangs up while writing.
Check the chipset on your Motherboard. If the chipset is from VIA, disable the DMA setting. (Device Manager - CD-ROM - Properties of MP7040A/S - Setting tab)
Buffer underrun errors occurs when creating Audio CDs, however it is possible to write CD-ROM data.
It is possible that the CD-ROM drive cannot extract digital audio data at 4x speed or higher. Using speed test software verify the speed at which the CD-ROM drive can extract audio data.
Errors occur when making an audio CD from a CD-ROM, though it is successful in writing CD-ROM data.
The CD-ROM drive may not be capable of extracting digital audio data from an audio CD. Using the MP7040A/S create *.wav files on the hard disk. (Refer to your software manual for details on how to create wave files.)
Erforming 'test-mode-writing' with Windows 95 (OSR-1), the error message, 'ASPI error' appears on the screen immediately after the test.
Update the driver for the SCSI adapter to the latest version.
