MP9200A

Products

MP9200A (ATAPI Model)

MP9200A

Interface ATAPI
Attached Software B's Recorder GOLD TM
  (CD mastering software)
B's CLiP TM
  (UDF packet writing software)
Drag'n Drop CD®
  (Writing software)
WinDVD TM
  (DVD-Video playback software)
Attached Media CD-R disc (1 piece)
High Speed CD-RW disc(1 piece)
Package Includes Quick Start Instruction
Mounting screws
Audio cable

Specifications

Type Internal type
Interface ATAPI
Buffer memory 2MB
Writing speed Writing: 4x, 8x, 12x 16x *1, 20x *1, (CD-R)(ZCLV)
Rewriting: 4x, 10x *2 (CD-RW)
Reading speed 40x Max.(CD-R/CD-RW/CD-ROM)(CAV)
12x Max.(DVD-ROM)
Data transfer rate
(at I/F)
33MB/sec. (Max.) Ultra DMA mode2 transfer
Average access time 100msec. (40x)
Recording capacity *3 700MB(type80)/650MB(type74)
JustLink fanction Supported
JustSpeed Function Supported
Writing mode Disc At Once, Session At Once *4, Track At Once, Multi-session, Packet Write
Writing format CD-DA, CD-ROM, CD-ROM XA, CD Extra, CD-I *4, Mixed-mode CD, VideoCD, PhotoCD *4, CD TEXT, Bootable CD
Installation *5 *6 Vertical(eject button upper) / Horizontal
Power requirements DC5V/12V
Dimensions
(W x D x H)
146.0 x 198.0 (including front panel) x 41.3 mm
  • Note :8cm single CDs cannot be written, but can be read or played back using this drive
  • *1:ZCLV writing is performed. During a 16x or 20x write operation, the maximum speed may be limited by the JustSpeed function depending on the media in use.
  • *2:10x speed CD-RW writing requires High Speed CD-RW media.
  • *3:ISO 9660 Mode I. Media capacity varies depending on formats
  • *4:Bundled software does not support this feature.
  • *5:8cm single CDs cannot be written, but can be read or played back using this drive. And when it is put vertical, "8cm CD" cannot be read.
  • *6:Business-card-sized CD-R/ROMs are not readable nor writable.

MP9200A System Requirement

[For CD-R/RW Writing]
OS Windows®95 (OSR2.0 or later), Windows®98, Windows®Me,Windows®2000 Professional , Windows NT® Workstation 4.0 (Service Pack 5 or later)
*Drag'n Drop CD is not compatible with Windows 95, 98 (not included SE) and Windows NT
Hardware IBM PC/AT compatible
Free half-height bay and space for +12V/+5V
power connector required*
*Need the slot,which is equal to about 42mm to be built in to a PC.
CPU Pentium 166 MHz processor or faster (JustLink in use)
RAM Minimum 64MB
Interface 1 Free E-IDE interface connector.
(primary slave, Secondary Master or Secondary slave)
Hard disk Over 100MB free disk space
(When using On-the-fly writing and JustLink)

[For DVD-Video Playing]
OS Windows®95 (OSR2.0 or later),Windows®98,
Windows®Me,Windows®2000 Professional ,
Windows NT® Workstation 4.0 (Service Pack 5 or later)
CPU Pentium II 350MHz processor or faster (with Motion Compensation function in the VGA Clip, Pentium II 300MHz processor or faster)
RAM Minimum 64MB
VGA Clip compatibility list
Manufacture Chip
3dfx Voodoo Banshee, Voodoo 3/4/5
3Dlabs Permedia III
ATI Rage IIC, Rage Pro, Rage 128/pro, Radeon, Artx
Intel i740, i810(e), i815(e)
Matrox G200, G400, G450
Nvidia RIVA TNT, TNT2/Ultra, TNT2-M64, GeForce256, Vanta, GeForce2/MX/GTS/Ultra
S3 ViRGE GX2, Savage 3D/4
SiS 6326 DVD, 300, 315, 530, 540, 620, 630, 633, 635, 730, 733, 735
VIA MVP4, ProMedia, PM133, KM133
  • *For latest information about VGA Chip compatibility list, please contact InterVideo,Inc. web site.
  • *JustLink and JustSpeed are trademarks of Ricoh Company, Ltd..

Recommended Media

  Recommended Checked
CD-R RICOH RICOH,maxell,
Mitsubishi Chemical(Verbatim),
Mitsui Chemicals,
TAIYO YUDEN(That's)
CD-RW RICOH RICOH,
Mitsubishi Chemical(Verbatim)
High-Speed CD-RW RICOH RICOH,
Mitsubishi Chemical(Verbatim)
  • *Notes:Cannot write even the checked media in rare case.

Page Top

For MP9200A users