MP9120A
- Specifications
- Software
Products
MP9120A (ATAPI Model)
| Interface | ATAPI |
| Attached software |
PrimoCD
TM Plus(CD mastering software)
abCD(Drag and Drop UDF packet writing software) WinDVD TM 2000(DVD-Video playback software) |
| Attached media |
1 High Speed CD-RW blank disc
1 CD-R blank disc |
| Package Includes |
Quick start Instruction
Audio cable Mounting screws |
Specifications
| Model | MP9120A |
| Type | Internal type |
| Interface | ATAPI |
| Buffer memory | 2MB |
| Writing speed |
2x 4x 8x 12x (CD-R),
2x 4x 10x(CD-RW) *1 |
| Reading speed |
32x Max.(CD-R/CD-RW/CD-ROM)
8x Max.(DVD-ROM) |
| Recording capacity*2 | 700MB (Type80)/650MB (Type74) |
|
Data transfer rate
(at I/F) |
33.3 MB/sec. (Max.) Ultra DMA33 transfer |
| Average Access Time | 100 msec. (32x) |
| Writing method | Disc At Once, Session At Once, Track At Once, Multi-Session, Packet Write |
| Writing formats | CD-DA, CD-ROM, CD-ROM XA, CD Extra, CD-I*3, Mixed-Mode CD,VideoCD, Photo CD*3, CD TEXT, Bootable CD |
| Installation | Vertical/Horizontal |
| Power requirements | DC +5V and +12V |
| Dimensions (W x D x H) | 146.0x198.0(Including the front panel)x41.3mm |
- Notes :8cm single CDs cannot be written, but can be read or played back using this drive
- *1:High-Speed CD-RW discs are required for 10x speed CD-RW writing.
- *2:ISO9660 Model (media capacity varies depending on format.)
- *3:Not supported by bundled software.
MP9120A System Requirements
[For CD-R/RW Writing]
[For DVD-Video Playing]
| OS: | Windows 95 (OSR2.0 or later), 98, 2000 Professional, NT Workstation 4.0(ServicePack 5 or later) |
| Hardware: |
IBM PC/AT compatible (DOS/V computer)
1 open half-height bay 1 free power supply connector + 12V/+5V. |
| CPU: | Pentium 166MHz processor or faster (JustLink is used) |
| RAM: | Minimum 64MB |
| Interface: | Primary slave ,secondary master with a machine supporting enhanced IDE, or a slave with a vacancy. |
| Hard disk: | Over 1 GB free hard drive space |
[For DVD-Video Playing]
| OS: |
Windows 95 (OSR2.0 or later), 98, 2000 Professional,
NT Workstation 4.0(Service Pack 4 or later) |
||||||||||||||||||||||||||||||||||||||||||||
| CPU: | Pentium II 350MHz or faster (With Motion Compensation function in the VGA Clip, Pentium II 300 MHz or faster) | ||||||||||||||||||||||||||||||||||||||||||||
| VGA Clip compatibility list: |
Windows95 OSR2 Windows98
WindowsNT4.0
Windows2000
|
- Specifications |
- Software
For MP9120A users
