
MP7060A-WA ATAPI Model
 |
| Interface |
ATAPI |
| Bundled software |
Easy CD Creator 3.5 Standard, DirectCD 2.5 software |
| Bundled media |
1 CD-R disc and 1 DirectCD formatted CD-RW disc |
| Package Includes |
user manual
audio cable
mounting screws |
|
|

MP7060S-WA SCSI Model
 |
| Interface |
SCSI 2 |
| Bundled software |
Easy CD Creator 3.5 Standard, DirectCD 2.5 software |
| Bundled media |
1 CD-R disc and 1 DirectCD formatted CD-RW disc |
| Package Includes |
user manual
audio cable
mounting screws |
|
|

| MP7060A-WA ATAPI Model |
| Type |
Internal |
| Interface |
ATAPI |
| Buffer memory |
2MB |
Data transfer rate
(no overhead) |
11.1MB/sec. (Max.) (PIO/DMA) |
| Writing speed *1 |
1x (Standard), 2x, 4x, 6x (CD-R), 1x, 2x, 4x (CD-RW) |
| Reading speed *1 |
Max. 24x (CAV) |
| Writing mode |
Disc At Once, Session At Once*2, Track At Once, PacketWrite |
| Writing format |
CD-DA, CD-ROM, CD-ROM XA, CD Extra, CD-I, Mixed-Mode CD, VideoCD*2, PhotoCD*2, CD-TEXT*2, Bootable CD |
| Average access time |
Less than 120msec. (24X) |
| Loading method |
Tray |
| Terminator |
- |
| Installation |
Vertical (with eject button on top)/Horizontal |
| Power requirements |
DC5V/12V |
| Power consumption |
12W (Max.) |
| Weight |
Less than 1.5kg |
| Dimensions (W x D x H) |
146.0 x 198.0 (incl. front panel) x 41.3mm |
| System requirements |
| OS: |
Windows 95/98/NT Workstation 4.0 (service pack 3, 4) |
| CPU: |
Pentium 166MHz or higher |
| Interface: |
Enhanced IDE interface connector (Primary Slave, Secondary Master or Slave) |
| Hardware: |
IBM PC/AT and compatible
1 Free slot for half-height drive
1 Free connector for +12V/+5V |
| RAM: |
32MB minimum(64MB recommended for NT) |
| Hard disk: |
Over 1GB hard drive (minimum 75MB free drive space) |
|
|
MP7060S-WA SCSI Model |
| Type |
Internal |
| Interface |
SCSI 2 |
| Buffer memory |
2MB |
Data transfer rate
(no overhead) |
8MB/sec. (Max., with Sync.Transfer) |
| Writing speed *1 |
1x (Standard), 2x, 4x, 6x (CD-R), 1x, 2x, 4x (CD-RW) |
| Reading speed *1 |
Max. 24x (CAV) |
| Writing mode |
Disc At Once, Session At Once*2, Track At Once, PacketWrite |
| Writing format |
CD-DA, CD-ROM, CD-ROM XA, CD Extra, CD-I, Mixed-Mode CD, VideoCD*2, PhotoCD*2, CD-TEXT*2, Bootable CD |
| Average access time |
Less than 120msec. (24X) |
| Loading method |
Tray |
| Terminator |
Internal active terminator(switch with jumper pin) |
| Installation |
Vertical (with eject button on top)/Horizontal |
| Power requirements |
DC5V/12V |
| Power consumption |
12W (Max.) |
| Weight |
Less than 1.5kg |
| Dimensions (W x D x H) |
146.0 x 198.0 (incl. front panel) x 41.3mm |
| System requirements |
| OS: |
Windows 95/98/NT Workstation 4.0 (service pack 3, 4) |
| CPU: |
Pentium 166MHz or higher |
| Hardware: |
IBM PC/AT and compatibles
1 Free slot for half-height drive
1 Free connector for +12V/+5V |
| RAM: |
32MB minimum(64MB recommended for NT) |
| Hard disk: |
Over 1GB hard drive (minimum 75MB free drive space)
SCSI Board(compatiblity has been checked for Adaptec AHA-154x/2940) |
|
|
| *1 |
1x and 4x CD-RW writing requires discs with 1x, 2x and 4x capabilities.Business-card-sized CD-R/ROMs are not readable nor writable. |
| *2 |
Requires additional software. |
Microsoft, Windows and WindowsNT are registered trademarks of Microsoft Corporation in United States and other coutries.
| - |
The official name of Windows is the Microsoft(R) Windows(R) Operating System. |
| - |
Other listed company names and product names are registered trademarks or trademarks of each company. |
| - |
Reproduction of commercial CD-ROM and CD-DA (digital audio) releases without permission of the copyright is prohibited by law. |
|
|
|
 |


 |