MP7040 series

Products

MP7040A-WA ATAPI Model

MP7040

Interface ATAPI
Bundled software DirectCD and EASY CD Creator software
Bundled media 1 CD-R disc and 1 CD-RW disc(DirectCD formatted)
Package Includes operation manual
audio cable
mounting screws

MP7040S-WA SCSI Model

MP7040

Interface SCSI 2
Bundled software DirectCD and EASY CD Creator software
Bundled media 1 CD-R disc and 1 CD-RW disc(DirectCD formatted)
Package Includes operation manual
audio cable
mounting screws

Specifications

MP7040A-WA ATAPI Model
Type Internal
Interface ATAPI
Data buffer memory 2MB
Data transfer rate(At I/F) 16.7MB/sec.(Max)(Raw though put)(PIO4, DMA2)
Writing speed *1 1x, 2x, 4x (CD-RW/CD-R)
Reading speed *1 1x ~ 20x (CD-RW/CD-R/CD-ROM)
Writing method Disc At Once, Track At Once, Session At Once, Packet Writing
Average access time 120msec. (20x)
Loading method Tray
Installation Vertical*/Horizontal
Power requirements DC +5V and +12V
Power consumption 12W (max.)
Weight Less than 1.5kg
Dimensions (W x D x H) 146.0 x 193.0 x 41.3mm
Error rate Less than 10 -12 bits
Temperature Operating: +5 ~+40 Centigrade
Non-operating: -30 ~ +65 Centigrade
Humidity Operating: 5 ~ 90% RH
Non-operating: 5 ~ 95% RH
System requirements
OS: Windows 98/95/NT WS4.0(service pack 3 ,4)
Hardware: IBM PC/AT and compatibles
(Pentium 100MHz or higher)
1 Free slot for half-height drive
1 Free connector for +12V/+5V
RAM: 32MB minimum(64MB recommended for NT)
Hard disk: Over 1GB hard drive
(minimum 75MB free drive space)
1E-IDE interface connector
(Primary slave, Secondary Master or slave)

MP7040S-WA SCSI Model
Type Internal type
Interface SCSI 2
Data buffer memory 2MB
Data transfer rate(At I/F) 8MB/sec. (Max., with Sync.Transfer)
Writing speed *1 1x, 2x, 4x (CD-RW/CD-R)
Reading speed *1 1x ~ 20x (CD-RW/CD-R/CD-ROM)
Writing method Disc At Once, Track At Once, Session At Once, Packet Writing
Average access time 120msec. (20x)
Loading method Tray
Installation Vertical*/Horizontal
Power requirements DC +5V and +12V
Power consumption 12W (max.)
Weight Less than 1.5kg
Dimensions (W x D x H) 146.0 x 193.0 x 41.3mm
Error rate Less than 10 -12 bits
Temperature Operating: +5 ~+40 Centigrade
Non-operating: -30 ~ +65 Centigrade
Humidity Operating: 5 ~ 90% RH
Non-operating: 5 ~ 95% RH
System requirements
OS: Windows 98/95/NT WS4.0(service pack 3 ,4)
Hardware: IBM PC/AT and compatibles
(Pentium 100MHz or higher)
1 Free slot for half-height drive
1 Free connector for +12V/+5V
RAM: 32MB minimum(64MB recommended for NT)
Hard disk: Over 1GB hard drive
(minimum 75MB free drive space)
SCSI 2 interface
SCSI
Board:
Compatiblity has been checked for Adaptec AHA-154x/2940.
  • *11x and 4x CD-RW writing requires discs with 1x, 2x and 4x capabilities. Business-card-sized CD-R/ROMs are not readable nor writable.
  • -When the unit is positioned vertically, ejection button should be at the top.
  • -Specifications and appearance subject to change without notice.
MP7040S-WA: IMPORTANT INFORMATION
  • -For Windows95 users: It is strongly recommended to install the latest mini port driver into your system before using Easy CD Creator. Please contact your SCSI card vendor for detail information.
  • -Microsoft, Windows and WindowsNT are registered trademarks of Microsoft Corporation in United States and other coutries.
  • -The official name of Windows is the Microsoft(R) Windows(R) Operating System.
  • -Other listed company names and product names are registered trademarks or trademarks of each company.
  • -Reproduction of commercial CD-ROM and CD-DA (digital audio) releases without permission of the copyright is prohibited by law.

Page Top

For MP7040 series users