4-wire Serial Interface Real Time Clock Module
The R2043K/T is a CMOS real-time clock IC connected to the CPU by four signal lines, CE, SCLK, SI, SO, and configured to perform serial transmission of time and calendar data to the CPU. The periodic interrupt circuit is configured to generate interrupt signals with six selectable interrupts ranging from 0.5 seconds to 1 month. The 2 alarm interrupt circuits generate interrupt signals at preset times. As the oscillation circuit is driven under constant voltage, fluctuation of the oscillator frequency due to supply voltage is small, and the time keeping current is small (TYP. 0.45 µA at 3V). The oscillation halt sensing circuit can be used to judge the validity of internal data in such events as power-on; The supply voltage monitoring circuit is configured to record a drop in supply voltage below two selectable supply voltage monitoring threshold settings. The 32.768kHz clock output function (N-channel open drain output) is intended to output sub-clock
pulses for the external microcomputer.
The oscillation adjustment circuit is intended to adjust time counts with high precision by correcting deviations in the oscillation frequency of the crystal oscillator.
Since the package for these ICs are TSSOP10G (4.0x2.9x1.0:
R2043T) or FFP12 (2.0x2.0x1.0: R2043K), high density mounting of ICs on boards is possible.
|Minimum Timekeeping supply voltage||TYP:0.66 to 5.5v (Worst: 1.00V to 5.5v); VDD pin|
|Low power consumption||0.45 µA TYP at VDD=3V (1.00µA MAX.)|
|four signal lines (CE, SCLK, SI, and SO) required for connection to the CPU.|
|Time counters (counting hours, minutes, and seconds) and calendar counters (counting years, months, days, and weeks) (in BCD format)|
|Interrupt circuit configured to generate interrupt signals (with interrupts ranging from 0.5 seconds to 1 month) to the CPU and provided with an interrupt flag and an interrupt halt|
|2 alarm interrupt circuits (Alarm_W for week, hour, and minute alarm settings and Alarm_D for hour and minute alarm settings)|
|With Power-on flag to prove that the power supply starts from 0V|
|32-kHz clock output pin (Nch open drain output)|
|Supply voltage monitoring circuit with two supply voltage monitoring threshold settings|
|Automatic identification of leap years up to the year 2099|
|Selectable||12-hour and 24-hour mode settings|
|High precision oscillation adjustment circuit|
|Built-in oscillation stabilization capacitors (CG and CD)|
|Package||TSSOP10G (4.0mm x 2.9mm x 1.0mm: R2043T)
FFP12 (2.0mm x 2.0mm x 1.0mm: R2043K)
- ・Communication devices (multi function phone, portable phone, PHS or pager)
- ・OA devices (fax, portable fax)
- ・Computer (desk-top and mobile PC, portable word-processor, PDA, electric note or video game)
- ・AV components (portable audio unit, video camera,camera, digital camera or remote controller)
- ・Home appliances (rice cooker, electric oven)
- ・Other (car navigation system, multi-function watch)
|Data Sheet||Package Info.||Mark Info.||Quality Assurance Data|
All PDF files are less than 1MB unless otherwise stated.
- Technical Support