2-wire Serial Interface (I2C Bus)
- 4-wire Serial Interface (SPI Bus)
- 3-wire Serial Interface
- 2-wire Serial Interface (I2C Bus)
| Product Name |
Time Keeping Current Typ. |
Time Keeping Voltage |
Alarm Function |
Perodic Interupt Function |
32kHz Clock Output | Battery Checker |
Clock Adjust Function |
OSC Halt Sensing |
Back-up battery switch-over circuit |
VD with DELAY Function |
Others | Package | Data Sheet (PDF) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Switch-over Threshold/ Detector Threshold |
|||||||||||||
| R2023K/T | 0.45μA (at 3V) |
Typ. 0.66V to 5.50V Worst.1.0V to 5.5V |
2set (W/H/M, H/M) |
0.5s to 1Month |
CMOS output, with Control pin |
1.6V or 1.3V |
FFP12 TSSOP10G |
||||||
| R2025S/D | 0.48μA (at 3V) |
1.15V to 5.50V | 2set (W/H/M, H/M) |
0.5s to 1Month |
CMOS output, with Control pin |
2.1V or 1.3V | Built-in crystal unit Frequency Deviation (0±5ppm) | SOP14 SON22 |
|||||
| R2051S/K/T | 0.40µA (at 3V) |
Typ. 0.75V to 5.50V Worst.1.0V to 5.5V |
2set (W/H/M, H/M) |
0.5s to 1Month |
CMOS output, with Level shifter |
2.10V or 1.35V | 2.4V, 2.8V, 4.0V | SSOP16 | |||||
| 2.4V, 2.8V | FFP12 | ||||||||||||
| (Register only. No INTR pin) |
(Register only. No INTR pin) |
- | 2.4V | TSSOP10G | |||||||||
| R2221T/L | 0.3µA *1 (at 3V) |
Typ. 0.6V to 5.5V Worst. 0.9V to 5.5V |
2set (W/H/M, H/M) |
0.5s to 1Month |
CMOS output, with Control pin |
1.35V | ECO mode is set by pin |
QFN018018-12 (under development) TSSOP10G |
|||||
| R2223T/L | ECO mode is set by register |
||||||||||||
| RS5C372A | 0.5µA (at 3V) |
1.3V to 6.0V | 2set (W/H/Mx2) |
0.5s to 1Month |
Nch Open drain (Controllable by command) |
- | 32768Hz/ 32000Hz crystal selectable |
SSOP8 | |||||
| RS5C372B | 1.45V to 6.00V | CMOS output (Controllable by command) |
|||||||||||
| RV5C386A | 0.35µA (at 3V) |
1.45V to 5.50V | 2set (W/H/M, H/M) |
0.5s to 1Month |
CMOS output, with Control pin |
2.1V or 1.6V | SSOP10G | ||||||
| RV5C387A | 0.35µA (at 3V) |
1.45V to 5.50V | 2set (W/H/M, H/M) |
0.5s to 1Month |
Nch Open drain (Controllable by command) |
2.1V or 1.6V | SSOP10G | ||||||
| Product Name |
Time Keeping Current Typ. |
Time Keeping Voltage |
Alarm Function |
Perodic Interupt Function |
32kHz Clock Output | Battery Checker |
Clock Adjust Function |
OSC Halt Sensing |
Back-up battery switch-over circuit |
VD with DELAY Function |
Others | Package | Data Sheet (PDF) |
| Switch-over Threshold/ Detector Threshold |
- *1 Time keeping current can be reduced in ECO mode.
- *All PDF files are less than 1MB unless otherwise stated.
- *If you don't have Adobe Reader, you can download free.
Support/ Technical Information
- Technical Support
Contact Us
