RP116Z Series

0.8%ACCURACY 0.7V OUTPUT 400mA LDO REGULATOR

Data Sheet / Flyer
Data Sheet * Flyer

The RP116Z Series are low voltage 400mA voltage regulator. These ICs had been further improved of low-voltage capability compared with previous low-voltage product.

The input voltage is as low as Min. 1.0V and the output voltage can be set from 0.7V. The output voltage accuracy has been improved to ±0.8% and due to a built-in transistor with low on-resistance of 0.55Ω (at VOUT=1.5V).

Each of these ICs consists of a voltage reference unit, an error amplifier, a resistor-net for voltage setting, and a current limit circuits for over-current for the destruction prevention by the over-current.

The CE pin can switch the regulator to standby mode.

The RP116Z is available in the small and thin WLCSP-4-P7 package (0.69mm square, 0.36mm thickness and 0.4mm pitch), consequently providing a high density mounting.

Supply Current Typ. 48μA
Standby Current Typ. 0.1μA
Ripple Rejection Typ. 60dB (f=10kHz)
Input Voltage Range 1.0V to 3.6V
Output Voltage Range 0.7V to 1.8V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
Output Voltage Accuracy ±0.8% (VOUT>=1.0V, Topt=25°C)
Temperature-Drift Coefficient of Output Voltage Typ. ±60ppm/°C
Dropout Voltage Typ. 0.22V (VOUT=1.5V)
Line Regulation Typ. 0.10%/V
Packages WLCSP-4-P7
Built-in Fold Back Protection Circuit Typ. 110mA (Current at short mode)
Built-in Constant Slope Circuit
Ceramic capacitors are recommended to be used with this IC 1.0μF or more
  • ・Power source for portable communication equipment.
  • ・Power source for electrical appliances such as cameras, VCRs and camcorders.
  • ・Power source for battery-powered equipment.
Data Sheet Flyer Package Info. Mark Info. Quality
Assurance Data
RP116Z Series RP116Z Series WLCSP-4-P7 RP116Z Reliability

All PDF files are less than 1MB unless otherwise stated.

  • Buy Products / Order Sample

Distributors

Ricoh semiconductor products are available at those dealers.

Information

Page Top