300mA LDO REGULATOR
The RP114x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, low supply current, low dropout, and high ripple rejection. Each of these voltage regulator ICs consists of a voltage reference unit, an error amplifier, resistors for setting output voltage, a short current limit circuit, a chip enable circuit, and so on.
RP114x features a minimum input voltage from 1.4V and the output voltage, which can be set from 0.8V to 3.6V (in 0.1V step). The output voltage of these ICs is internally fixed.
These ICs perform with low dropout voltage due to built-in transistor with low ON resistance. Low supply current and a chip enable function prolong the battery life of each system. The ripple rejection, line transient response and load transient response of the RP114x Series are excellent, thus these ICs are very suitable for the power supply for hand-held communication equipment.
Since the packages for these ICs are DFN(PLP)1010-4, SC-88A, SOT-23-5, therefore high density mounting of the ICs on boards is possible.
|Supply Current||Typ. 50µA|
|Standby Current||Typ. 0.1µA|
|Input Voltage Range||1.4V to 5.25V|
|Output Voltage Range||0.8V to 3.6V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
|Output Voltage Accuracy||±1.0% (VSET>2.0V, Topt=25°C)|
|Temperature-Drift Coefficient of Output Voltage||Typ. ±80ppm/°C|
|Dropout Voltage||Typ. 0.25V (IOUT=300mA, VSET=2.8V)|
|Ripple Rejection||Typ. 75dB (f=1kHz)|
|Line Regulation||Typ. 0.02%/V|
|Packages||DFN(PLP)1010-4, SC-88A, SOT-23-5|
|Built-in Fold Back Protection Circuit||Typ. 60mA (Current at short mode)|
|Ceramic capacitors are recommended to be used with this IC||1.0µF or more|
- ・Power source for portable communication equipment.
- ・Power source for electrical appliances such as cameras, VCRs and camcorders.
- ・Power source for battery-powered equipment.
|Data Sheet||Flyer||Package Info.||Mark Info.||Quality
All PDF files are less than 1MB unless otherwise stated.
- Technical Support