RP107x Series

OUTPUT CAPACITOR-LESS/LOW VOLTAGE 200mA LDO REGULATOR

Data Sheet / Flyer
Data Sheet * Flyer
(1.00MB)    

The RP107x Series are CMOS-based LDO regulators featuring 200mA output.

Since the output capacitor and noise bypass capacitor are able to be reduced and the packages are small DFN(PLP)1212-6, WLCSP-4-P5, and SC-88A, high density mounting on boards are possible. The input voltage (VIN) is as low as Min.1.4V and the output voltage can be set from 1.0V.

Supply current is as low as 9.5μA compared to existing lines. The CE pin can switch the regulator to standby mode.

Supply Current Typ. 9.5μA
Standby Mode Typ. 0.1μA
Dropout Voltage Typ. 0.27V (IOUT=200mA, VOUT=3.0V)
Ripple Rejection Typ. 70dB (f=1kHz, VOUT <=1.2V)
Typ. 65dB (f=1kHz, 1.2V<VOUT < 2.2V)
Typ. 60dB (f=1kHz, VOUT >=2.2V)
Temperature-Drift Coefficient of Output Voltage Typ. ±100ppm/°C
Line Regulation Typ. 0.02%/V
Output Voltage Accuracy ± 1.0%
Packages WLCSP-4-P5, DFN(PLP)1212-6, SC-88A, SOT-23-5
Input Voltage Range 1.4V to 5.25V
Output Voltage Range 1.0V to 4.2V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
Built-in Fold Back Protection Circuit Typ. 50mA (Current at short mode)
Output capacitor free and noise bypass capacitor free
  • Power source for portable communication equipment.
  • Power source for electrical appliances such as cameras, VCRs and camcorders.
  • Power source for battery-powered equipment.
  • Power source for electrical home appliances.

Data Sheet Flyer Package Info. Mark Info. Quality
Assurance Data
RP107x Series
(1.00MB)
RP107x Series DFN(PLP)1212-6 RP107K Reliability
SOT-23-5 RP107N Reliability
SC-88A RP107Q Reliability

All PDF files are less than 1MB unless otherwise stated.

Note : Non-promotion Products
WLCSP-4-P5 (RP107Z Series) will be discontinued in the future. New adoption is not recommended.

  • Buy Products / Order Sample

Distributors

Ricoh semiconductor products are available at those dealers.

Information

Page Top