OUTPUT CAPACITOR-LESS/LOW VOLTAGE 200mA LDO REGULATOR
The RP107x Series are CMOS-based LDO regulators featuring 200mA output.
Since the output capacitor and noise bypass capacitor are able to be reduced and the packages are small DFN(PLP)1212-6, WLCSP-4-P5, and SC-88A, high density mounting on boards are possible. The input voltage (VIN) is as low as Min.1.4V and the output voltage can be set from 1.0V.
Supply current is as low as 9.5μA compared to existing lines. The CE pin can switch the regulator to standby mode.
|Supply Current||Typ. 9.5μA|
|Standby Mode||Typ. 0.1μA|
|Dropout Voltage||Typ. 0.27V (IOUT=200mA, VOUT=3.0V)|
|Ripple Rejection||Typ. 70dB (f=1kHz, VOUT <=1.2V)
Typ. 65dB (f=1kHz, 1.2V<VOUT < 2.2V)
Typ. 60dB (f=1kHz, VOUT >=2.2V)
|Temperature-Drift Coefficient of Output Voltage||Typ. ±100ppm/°C|
|Line Regulation||Typ. 0.02%/V|
|Output Voltage Accuracy||± 1.0%|
|Packages||WLCSP-4-P5, DFN(PLP)1212-6, SC-88A, SOT-23-5|
|Input Voltage Range||1.4V to 5.25V|
|Output Voltage Range||1.0V to 4.2V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
|Built-in Fold Back Protection Circuit||Typ. 50mA (Current at short mode)|
|Output capacitor free and noise bypass capacitor free|
- ・Power source for portable communication equipment.
- ・Power source for electrical appliances such as cameras, VCRs and camcorders.
- ・Power source for battery-powered equipment.
- ・Power source for electrical home appliances.
|Data Sheet||Flyer||Package Info.||Mark Info.||Quality
All PDF files are less than 1MB unless otherwise stated.
WLCSP-4-P5 (RP107Z Series) will be discontinued in the future. New adoption is not recommended.
- Technical Support