150mA LDO REGULATOR
The R1183Z Series are CMOS-based voltage regulator ICs with extremely low supply current, and low dropout voltage realized with the built-in low ON-resistance Tr.
150mA output current is guaranteed, and the supply current of IC itself is Typ. 1μA at no load.
The R1183Z series have almost same characteristics as R1180x Series. Only difference is ultra small chip size package (WLCSP4-P2: 0.79mm×0.79mm) and built-in auto discharge function is available with D version, and output voltage accuracy improved to ±1.2%.
Since the package for these ICs is WLCSP-4-P2, the mount area size is less than 1/4 of R1180D Series (SON1612-6).
|Supply Current||Typ. 1µA (Except the current through CE pull-down circuit)|
|Standby Mode||Typ. 0.1µA|
|Dropout Voltage||Typ. 0.25V (Iout=150mA ,Vout=3.0V)|
|Temperature-Drift Coefficient of Output Voltage||Typ. ±100ppm/°C|
|Line Regulation||Typ. 0.05%/V|
|Output Voltage Accuracy||±1.2%|
|Output Voltage Range||1.2V to 3.6V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
|Input Voltage Range||1.7V to 6.0V|
|Built-in Fold Back Protection Circuit||Typ. 40mA|
|Built-in Auto Discharge Function||D Version|
|Ceramic capacitors are recommended to be used with this IC||0.1µF or more|
- ・Stable voltage reference.
- ・Power source for electrical appliances such as cameras, VCRs and camcorders.
- ・Power source for battery-powered equipment.
|Data Sheet||Flyer||Package Info.||Mark Info.||Quality Assurance Data|
All PDF files are less than 1MB unless otherwise stated.
- Technical Support