Voltage Detectors
| Product Name | Operating Voltage |
Input Signal | Reset Output | Supply Current | Output Delay Time |
Output Release Time |
Packages | Data Sheet (PDF) |
|
|---|---|---|---|---|---|---|---|---|---|
| Reset Timer IC | R3200x001x | 1.65V to 5.5V | SR0, SR1 | RST, RST2 | 0.28µA(Timer inactive) 3.0µA(Timer active) |
7.5s, 11.25s | - |
DFN(PLP)2020-8B DFN1216-8 (Under Development) |
|
| R3200x002x | 7.5s | 0.234s |
| Product Name | Operating Voltage |
Detector Threshold Range |
Detector Threshold Accuracy |
Reset Signal |
Output Delay Time Accuracy |
Supply Current *1 |
Packages | Data Sheet (PDF) |
|
|---|---|---|---|---|---|---|---|---|---|
| Normal type | R3111x | 0.7V to 10.0V | 0.9V to 6.0V | ±2.0% | L/H | - | 0.8µA | ||
| R3113D | 0.6V to 6.0V | 1.2V to 4.5V | ±2.0% | L | - | 0.8µA | |||
| R3114x | 0.5V to 6.0V | 0.7V to 5.0V | ±0.8% | L | - | 0.35µA | |||
| With delay functions (With external capacitor) |
RN5VD | 0.7V to 10.0V | 0.9V to 6.0V | ±2.5% | L | Not specified | 2.5µA | ||
| R3112x | 0.7V to 6.0V | 0.9V to 5.0V | ±2.0% | L | Not specified | 0.7µA | |||
| R3116x | 0.5V to 6.0V | 0.7V to 5.0V | ±0.8% | L | ±15% | 0.35µA | |||
| R3119NxxxA | 1.2V to 36V | 2.3V to 12V | ±1.5% | L | -50% ~ +80% | 3.3µA | |||
| With delay circuit
(No external capacitor) |
R3132x | 0.8V to 6.0V | 1.0V to 5.0V | ±2.0% | L | ±15% | 0.8µA | ||
| R3133x | H | ||||||||
| R3134x | 0.75V to 6.0V | 1.0V to 5.0V | ±1.8% | L | ±15% | 0.8µA | |||
| With SENSE pin | R3117xxx1/2*2 | 1.0V to 6.0V | 0.7V to 5.0V | ±1.0% | L | - | 0.29µA | ||
| R3117xxx3/4*3 | |||||||||
| R3119NxxxE | 2.1V to 6.0V | 2.3V to 12V | ±1.5% | L | - | 3.3µA | |||
| With SENSE pin/ With delay functions |
R3118x | 1.0V to 6.0V | 0.6V to 5.0V | ±1.5% | L | ±30% | 0.4µA | ||
| Product Name | Operating Voltage |
Detector Threshold Range |
Detector Threshold Accuracy |
Reset Signal |
Output Delay Time Accuracy |
Supply Current *1 |
Packages | Data Sheet (PDF) |
- *1 Detector Threshold Voltage(-VDET)=1.5V, at Released
- *2 If the SENSE pin voltage of R3117xxx1A/C and R3117Qxx2A/C make the gradual curve by rasing 0.5V/ms or less, it may cause noise when the output voltage is switched from low to high. Please use R3117xxx3A/C and R3117Qxx4A/C Series for new designs instead of these products to avoid the above problem.
- *3 R3117xxx3A/C and R3117Qxx4A/C Series may cause the malfunction (miss detection), in the case of its VDD pin voltage changes very rapidly. Please check the details in the page 11 of the datasheet.
- *All PDF files are less than 1MB unless otherwise stated.
- *If you don't have Adobe Reader, you can download free.
Support/ Technical Information
Contact Us
-
Our sales activities
-
Other Inquiries