R5534V

Data Sheet
Data Sheet
Rev.1.00 (254KB)
PCMCIA Power Controller
The R5534V switches between the three VCC voltages (0V/3.3V/5.0V) and the VPP voltages (off/0V/3.3V/5.0V).
The R5534V has two sets of VCC output and VPP output each, therefore it fits dual slot models. If VCC pin or VPP pin may be clamped to the GND, short current limit works at 1A(Min.) for VCC and 0.15A(Min.) for VPP.
The R5534V is suitable for standard PCMCIA power controllers.
Low on resistance P-channel MOSFET Switch
Dual Slot Power Supply Control
Over- Current Limit Protection
Thermal Shutdown Protection
Low Consumption Current
Break-Before-Make Switching
SSOP-20pin Package
  • ・Dual Slot PC card Power Supply Pin Voltage Switch
  • ・Card-bus Slot Power Supply Control
  • ・PC Card Reader/Writer
Data Sheet
(PDF) 		Package Info.
(PDF) 		Mark Info.
(PDF) 		Quality Assurance Data
(PDF)
R5534V Series
Rev.1.00 (254KB) 		SSOP-20 to be prepared to be prepared to be prepared

All PDF files are less than 1MB unless otherwise stated.

  • Buy Products / Order Sample

Distributors

Ricoh semiconductor products are available at those dealers.

Information

Page Top